Product Description
Xitron 2553 Power Quality Analyzers
Xitron 2553 Power Quality Analyzers Designed w/DSP Technology
The Xitron 2553 Power Quality Analyzers features the ideal
combination of precision, speed and ease-of-use in an instrument so economical it can be on every bench. The 2553/2553E is a high performance Power Quality Analyzer. The 2553 converts voltage and current signals to digital data using DSP chips where the signals are sampled automatically and periodically. A to D converters scale and sample data. The data-analysis components analyze voltage and current input samples for harmonic content.
Xitron Configurations for 1Ø 2-wire, 1Ø 3-wire, 3Ø 3-wire or 3Ø 4-wire Power Sources and Loads
The Xitron 2553 Power Quality Analyzers are an easy-to-use, general purpose power analyzer, which may be configured for 1Ø 2-wire, 1Ø 3-wire, 3Ø 3-wire or 3Ø 4-wire power sources and loads. Overall, the 2553 analyzes the electrical power delivered to or by a device. The unit can be quickly set up on your bench top. You can adjust the viewing angle using the handle and adjust the contrast from the configuration screen. The 2553 Option “E” provides support for external current transducers of the current to current or current to voltage types. This option also provides terminals at the rear panel allowing the user to power external circuitry from the 2553’s internal DC power supplies (positive and negative 15V). Both the 2553 and 2553E analyzers display voltage, current and wattage “results” in numeric and graphic waveform formats. Results include voltage, current, wattage and harmonic frequencies in absolute, percentage and phase. You may display the fundamental in a bargraph format through the 40th harmonic or in a listing format through the 50th harmonic. You may examine power waveforms graphically and chart historical results in divisions of time from seconds to days. Additional screens display voltage and current peaks, harmonics, averages and reactive power with K-factor and crest factor of the voltage or current signal. All of the data that can be displayed on the 2553/2553E screens can be printed in full page printout formats. Both bargraph and listing fundamental printouts contain the 2nd through the 50th harmonics.
“Soft Key” Menus
The six-key front panel has four ‘soft’ keys with menus that simplify the selection of measurements. In addition to numerical results, the 2553 captures waveforms with 200-point precision. These waveforms can be displayed or directly output at full resolution to a PCL printer. Power and amplitude measurements with a base accuracy of 0.1% are automatically synchronized to the fundamental frequency. Peak measurements of voltage, current and power include continuous, inrush and history modes plus an accumulation mode for W-Hr, A-Hr, and VA-Hr.
Xitron 2553 Features
- A 200ms to 10-Day historical data logging feature
- Built-in power supply for Hall Effect CT’s
- Transducer applications
- 6-key front panel has four soft keys with toggle menus
- Output is graphically displayed in waveforms, bar graphs, numerically and can be sent directly to a printer or to a PC
- Low Cost/High Performance
- Measures and displays power, frequency, harmonics, THD, CF, K-Factor, Triplens & Inrush
- Up to 1500 volts peak, 40 amps peak internally & up to 10,000 amps with the use of External Current Transducers
- DC and 20mHz – 80kHz Frequency Range
- Graphics Display shows numerical results, waveforms, bar graphs & history plots
- 16-bit A-D takes up to 220k samples/second
- Simple 6-key user interface
- PCL/Text Printer output,IEEE488 interface included
- 1ø-2W, 1ø-3W, 3ø-3W and 3ø-4W configurable using the same wiring
PARAMETER | SPECIFICATIONS |
Voltage | Range: 950Vpk , 400Vpk , 1500Vpk |
Internal Current | Range 8Apk , 40Apk |
Resolution | 0.05% of range |
Frequency Measurement | 20 mHz to 80 kHz, 0.01% |
Crest Factor | |
Range | 1 to 99 |
Accuracy | from peak results |
Harmonic & Spectrum Analysis | |
Frequency Range | 20 mHz to 50 kHz |
THD | 0.1% |
Harmonic | 0.05% |
Phase | 0.1º |
Waveforms | Actual, Peak Capture and Distortion content |
Digital Interfaces (standard) | |
IEEE488.1 | Full talk/listen capabilities |
Parallel Printer | IEEE1284, unformatted text or PCL Compatible |
Warranty | 2 years |
Link to Power Quality Explained
Xitron 2553 Datasheet
XiTRON Model | Description Power Analyzers & Accessories | MSRP | Sales Price | e-QUOTE for Discount |
---|---|---|---|---|
Xitron 2000IN | 2000IN DC Voltage and Current Calibrator | $2,750 | $2612.00 | e-QUOTE 2000IN |
Xitron 2000MN | 2000MN DC Voltage, Current, & Temperature Calibrator | $3,350 | $3182.00 | e-QUOTE 2000MN |
Xitron 2553-950V-40A | Xitron 2553E-950V-40A Three-Phase Power Analyzer | $3,995.00 | $3,755.00 | e-QUOTE 2553E-950V-40A |
Xitron 2801 | Xitron 2801 single channel Power Analyzer | $2,750.00 | $2,312.00 | e-QUOTE Xitron 2801 |
Xitron 2802 | Xitron 2802 Dual (2) channel Power Analyzer | $4,250.00 | $3,995.00.00 | e-QUOTE Xitron 2802 |
Xitron 2503AH-1CH | Xitron 2503AH-1CH Single Phase Power Analyzer |
$6,495.00 | $6105.00 | e-QUOTE XiTRON 2503-1CH |
Xitron 2503AH-2CH | Xitron 2503AH-2CH Dual Phase Power Analyzer Power Analyzer |
$9,195.00 | $8,643.00 | e-QUOTE XiTRON 2503-2CH |
Xitron 2503AH-3CH | Xitron 2503AH-3CH Three Phase Power Analyzer |
$11,995.00 | $11,275.00 | e-QUOTE XiTRON 2503-3CH |
Xitron XT3561 | Xitron XT3561 1Ø-2Ø-3Ø Portable Power Quality Analyzer | $6495.00 | $6169.00 | e-QUOTE XiTRON XT3561 |
Reviews
There are no reviews yet