Vitrek V79 30A Ground Bond Tester
Vitrek V79 30A Ground Bond Tester features Programmable 30A Ground Bond Testing with USB-RS232-Data I-O Interfaces
Vitrek V79 30A Ground Bond Tester features programmable 30A Ground Bond Testing using USB-RS232-Data I-O interfaces. The V79 HiPot Insulation Tester utilizes high speed DSP technology and incorporates USB, RS232 and Digital I-O interfaces to provide Ramp and Dwell High Current as test currents for Ground Bond Integrity Testing.
Vitrek V79 30A Ground Bond Tester features 30A Ground Bond Testing & Low Resistance
Vitrek V79 30A Ground Bond Tester provides 30A Ground Bond Testing and a 0~60KΩ range featuring a low resolution of 0.001Ω for ground continuity measurements. The Vitrek V79 30A Ground Bond Tester uses 4 terminal measurements while providing up to 10.5mA test Current for the resistance measurement with an open circuit voltage of 4.15V.
Vitrek V79 30A Ground Bond Tester Tests Integrity of Earth Ground Connection
Earth Ground test is performed using Vitrek V79 30A Ground Bond Tester by inserting high levels of current between the third pin (ground) and outside metal body of the product under test. The maximum acceptable value is generally 0.5 ohms although certain standards may specify 0.1 ohms. This test is generally carried out at a slightly higher current (e.g. 25-60A) so that the ground bond circuit maintains safe voltages on the chassis of the product, even at a high current, before the circuit breaker trips. This test is essential so that the product does not cause an electric shock resulting from insulation failure.
Vitrek V79 30A Ground Bond Tester Programmable Ramp Timing Tests
Vitrek V79 30A Ground Bond Tester provides programmable Ramp timing control over High Current Ramp Up, Dwell and Ramp-down. Ramp UP of the 30A can be from 0 to 99.9 seconds to 0.1sec resolution and to an accuracy of 0.05sec. The Test Time of Dwell Time can be programmed from 0.1sec to 9999sec to a resolution of 0.1sec to an accuracy of 0.15sec. The Ramp Down may be set to zero (0.0sec) or as the same time as Ramp UP.
Vitrek V79 30A Ground Bond Tester offers a Speedy Safety Shutdown to a Failure
Vitrek V79 30A Ground Bond Tester Shutdown occurs within 1-msec of failure breakdown or ARC detection. The HV Safety indicator is illuminated within 1msec. User Stop or Interlock is opened within 2-msec. For Breakdown protection, The Vitrek V79 automatically checks for sudden uncontrolled increases of load current throughout test, no min-max leakage required. For ARC detection during Hipot tests, ARC detection may to set to none or an adjustable level between 1 and 30mApk, 5MHz bandwidth.
Vitrek V79 30A Ground Bond Tester uses DSP Technology
With color touch LCD & high speed DSP technology, the compact & rugged Vitrek V79 5KVAC-DC-IR-GB Hipot Tester sets the standard for price to performance ratio. Made in the USA to meet tough UL, CSA, TUV and IEC standard’s requirements for Insulation Breakdown High Voltage HiPot testing. It additionally features low resistance measurements for continuity confirmation.
Vitrek V79 30A Ground Bond Tester is One of Six Models
Choose from six low cost Vitrek V7X series models offering AC & DC Hipot to 5KV, leakage current measurement to 100 nano-amps, Insulation Resistance to 450GΩ and Ground Bond Testing Current to 30 A. Combine all that with USB, RS232 and Digital I-O interfaces, plus a 2 year warranty and the Vitrek V7X Series Hipot/Ground Bond Testers are simply unbeatable.
Vitrek V79 30A Ground Bond Tester General Specifications-Features
- Pause Step: A timed pause of defined length between 0.1s and 999.9s.
- Hold Step: A user continued hold step with a 2 line message to be displayed to the user while the step is executing.
- Switch Step: Provides control of up to 4 Vitrek 964 switching units, each SWITCH step allows complete control over the states of all switches
- Test Memory: Up to 999 total test steps may be defined in up to 60 different sequences
- Continuity Resistance: Ground Continuity 4.5Ω Max. Min/Max Limit with or without Steps or set to none
- Ground Bond Test: Programmable Current 1A to 30A (42Apk-50/60Hz), 0.01A steps, Accuracy 2.5%
e-QUOTE for Delivery and Discounted Price Quotation
|Vitrek Model||Description||MSRP||Sale Price||e-QUOTE Discount|
|Vitrek V70||V70~ 5KV AC Hipot + Low Resistance||$1,295.00||$1,268.00||e-QUOTE V70|
|Vitrek V71||V71~ 5KV AC/DC Hipot + low Resistance||$1,695.00||$1,660.00||e-QUOTE V71|
|Vitrek V73||V73~ 5KV AC/DC Hipot + low Resistance + IR||$1,995.00||$1,954.00||e-QUOTE V73|
|Vitrek V74||V74~ 5KV AC/DC Hipot, IR and 30A Ground Bond||$2,995.00||$2,934.00||e-QUOTE V74|
|Vitrek V75||V75~ 5KV AC/DC Tester + IR + 16-Channel HV Scanner||$2,995.00||$2,934.00||e-QUOTE V75|
|Vitrek V79||V79 ~ 30A Ground Bond Tester + IR||$1,495.00||$1,464.00||e-QUOTE V79|
|TL -209||TL -209 Hipot and Continuity Test Lead with Alligator Clips||$85.00||e-QUOTE V79|
|ISO-CALN-V7X||ISO 17025 Accredited Cal Cert (with purchase). Upgrade from a NIST traceable cal cert with no data to an accredited calibration certificate with data and uncertainties.||$145.00||e-QUOTE V79|
|K-2R||K-2R 4 Wire 2 Clip Ground Bond Lead||$185.00||e-QUOTE V79|
|TL-115 -95||TL-115 -95 NEMA 5-15 Power Socket Hipot Lead, for Testing Corded Products||$145.00||e-QUOTE V79|
|TL-115-GBR||TL-115-GBR NEMA 5-15 Power Socket Hipot and Ground Bond Test Box||$195.00||e-QUOTE V79|
|RS -2||RS-2 6' RS232 Serial Communication Cable||$45.00||e-QUOTE V79|
|TL-IEC-GBR||TL-IEC-GBR 4' IEC 320 Power Socket Lead for Hipot and Ground Bond||$145.00||e-QUOTE V79|
|TL-IEC-95||TL-IEC-95 4' IEC 320 Power Socket Lead for Hipot||$95.00||e-QUOTE V79|
|RM-7||RM-7 Rack Mount for V7x Series||$295.00||e-QUOTE V79|
|RSS-7||RSS-7 Remote Start Switch||$145.00||e-QUOTE V79|
|DIO-X2||DIO-X2 Expand the DIO Port to Connect Multiple Accesories||$35.00||e-QUOTE V79|
|HVW-7||HVW-7 High Voltage Warning Light||$195.00||e-QUOTE V79|
|V7X-230V||V7X-230V Factory Set 230V Line Input||$0.00||e-QUOTE V79|
|QTPro-7||QTPro-7 QuickTest Pro Software for the V7x Series||$345.00||e-QUOTE V79|