Login / Register
  • CONTACT
ATEquip

Test and Measurement Equipment

0 Items
$ 0 00

Cart

View Cart Empty Cart
  • No products in the cart.
TESTING EQUIPMENT BUY HERE
CUSTOMER SUPPORT 858-756-8742
ACCEPTED CREDIT CARDScreditcard1
  • ATEquip Distributor Test-Measurement Equipment Instruments-Calibration Standards
    • AEMC Products
    • Ametek
    • Crystal Engineering Corporation Products
    • GW Intek Products
    • Optical Wavelength Laboratories ~ OWL
    • XiTRON Power Quality Analyzers
      1Ø-2Ø-3Ø Analyzers
  • ABOUT US
  • NEWS
  • CONTACT US
    • PRIVACY POLICY
Home / Vitrek / Vitrek 950i / Vitrek 950i HiPot Ground Bond Testers
On sale!
Vitrek 950i HiPot Ground Bond Testers

Vitrek 950i HiPot Ground Bond Testers

$4,550.00 $4,450.00

The Vitrek 950i Hipot Ground-Bond Testers offers 6 models with up to 10KVAC/DC HiPot Insulation Testing with 40A Ground Bond Capability.

SKU: Vitrek-950i Category: Vitrek 950i Tags: 40Amp Ground Bond Tester, AC 10KV HiPot, DC 10KV HiPot, Insulation Resistance Tester, Vitrek 950i HiPot Ground-Bond Testers
  • Description
  • Product Inquiry
  • Reviews (0)

Product Description

Vitrek 950 HiPot Ground Bond  Testers ~ Insulation Resistance Tester

The Vitrek 950 Hipot Ground Bond Testers offers 6 models with up to 11KVDC & 10KVAC HiPot Insulation Resistance Electrical Safety Compliance Testing with 40A Ground Bond Capability.Vitrek 950 HiPot Ground Bond Testers

Introducing the Vitrek 950 Hipot Ground Bond Testers family of powerful, versatile, easy-to-use Hipot Ground Bond Testers. With six models to choose from, one is just right for your Hipot Testing for insulation break-down test requirements.

Vitrek 950 Hipot Ground Bond Testers Raises the Bar for Electrical Compliance Safety Testing

Vitrek 950 HiPot Ground Bond TestersRethink what you know about Hipot Ground Bond Insulation Resistance Testers.Vitrek  incorporates the latest DSP technology into the new 950i Hipot Ground Bond Testers. Not only does this brings you the fastest, most capable, feature-rich Hipot testers available but for a surprisingly low-price.  Vitrek’s new 950i Series combines high output power, with a wide range of AC & DC voltage outputs. Most beneficial by incorporating an extremely low leakage current measurement feature!  Also, the 950i features a 4-wire milli-ohmmeter with dynamic ranges up to 100K ohms. Additionally, there is an overlapping Tera-ohm class Insulation Resistance function.  The 950i Series tops off with an optionally available 40 Amp Ground Bond capability . Now, you’re just beginning to get a feel for what the new Vitrek 950 Series Hipot Testers can do for you.   Choose from any one of six models: 951i, 952i, 953i, 954i, 955i or the Ground Bond only 959i.  

Available Vitrek’s 950i Series Models

  • 951i~ Featuring Vac/Vdc to 6KV, 4-wire low Milli-ohm, Insulation Resistance, Leakage current, Arc detection, Fault interruption and, lastly, with RS232 interface. Also, optionally available, GPIB, Ethernet and USB Printer  Port.
  • 952i~Incorporates all of the 951i features and, also 40A Ground Bond Test current
  • 953i~ Incorporates all of the 951i features but, in addition, includes 11KVDC Hipot and Insulation Resistance testing
  • 954i~ Incorporates all of the 951i features but, in addition, includes 11KVDC Hipot and Insulation Resistance and, also, 40A Ground Bond Test current
  • 955i~ Incorporates all of the 951i features but, in addition, includes 11KVDC and 10KVAC Hipot and Insulation Resistance testing
  • 959i~ Provides 40A Ground Bond Testing with High Speed RS232. Also, optionally available, GPIB, Ethernet and USB Printer  Port.

Email sales@atequip.com

Vitrek_950_DS Datasheet

Vitrek 950 HiPot Ground Bond Testers Performs “Dielectric Breakdown Tests“

 Dielectric Breakdown Tests: The test voltage is increased until the dielectric fails, or breaks down, allowing too much current to flow. This test allows designers to estimate the breakdown voltage of a product’s design. Additionally, it identifies the location of the breakdown occurrence. Due to the destructive nature of this test, usage is on a random sample basis.

Vitrek 950 HiPot Ground Bond Testers Performs “Dielectric Withstand Tests“

Dielectric Withstand Tests: A standard test voltage application occurs somewhat below the specification Breakdown Voltage. Monitoring the resulting leakage current is part of the test. If the leakage current is below/above a preset limit, the test is PASS/FAIL.  This test is non-destructive. All products must undergo this test, prior to shipment, to satisfy applicable Safety Standards in compliance with safety agencies requirements

Vitrek 950 HiPot Ground Bond Testers Performs “Dielectric Insulation Resistance Tests“

Dielectric Insulation Resistance Test: This test is used to provide a quantifiable resistance value for all of a product’s insulation. The test voltage is applied in the same fashion as a standard Hipot test, but is specified to be Direct Current (DC). The voltage and measured current value are used to calculate the resistance of the insulation

 Adobe ReaderDownload Free  Adobe Reader~“Link to “HiPot Explained“

 Contact ATEquip for Special Pricing and Delivery Quotation. sales@atequip.com

 Vitrek 950 HiPot Ground Bond Testerscreditcard1

Vitrek Model Description MSRP Sale Price e-Quote Special Price
Vitrek 951i 951i 6KV AC/DC HiPot, Insulation Resistance and Low Resistance Tester $4,550.00 $4,458.00 e-QUOTE 951i
Vitrek 952i 952i 6KV AC/DC/IR HiPot, Ground Bonding and Low Resistance Tester $5,195.00 $5,090.00 e-QUOTE 952i
Vitrek 953i 953i 11KVDC 6KVAC HiPot, Insulation Resistance and Low Ohm Tester $5,395.00 $5,286.00 e-QUOTE 953i
Vitrek 954i 954i 11KVDC 6KVAC HiPot, Insulation Resistance and Ground Bonding $6,195.00 $6,070.00 e-QUOTE 954i
Vitrek 955i 955i 10KVDC 10KVAC HiPot, Insulation Resistance and Low Ohm Tester $6,195.00 $6,070.00 e-QUOTE 955i
Vitrek_957i 957i 15KVDC 6KVAC HiPot, Insulation Resistance and Low Ohm Tester $6195.00 $6,070.00 e-QUOTE 955i
Vitrek_959i 959i Ground Bond/LR Safety Compliance Analyzer $3,195.00 $3,130.00 e-QUOTE 959i

Vitrek P/N Description Price e-QUOTE
Vitrek PMT-1 PMT-1 Pulse Mode / High Speed Flash Test Option $495.00 e-QUOTE
AC-2 AC-2 200mA 2 KVAC Output Option $195.00 e-QUOTE
QTPRO-9 QTPRO-9 Test Automation Software for XP, Vista, 7 $395.00 e-QUOTE
GPIB-9 GPIB-9 Adds a GPIB Interface to your 950i Series $395.00 e-QUOTE
K1 K1 4-wire Kelvin Low Resistance Measurement Lead Set $150.00 e-QUOTE
950i-K-2 950i-K-2 4-Wire 40 A Ground Bond Lead Set $185.00 e-QUOTE
TL-IEC95 TL-IEC95 IEC Power Socket HV Test lead Set $95.00 e-QUOTE
TL-IEC95GB TL-IEC95GB IEC Power Socket HV & GB Test lead Set $195.00 e-QUOTE
RM-1 RM-1 Rack Mount Kit $75.00 e-QUOTE
AC-30 AC-30 30 KVAC 10mA External Output Option $3,295.00 e-QUOTE
RPO-95 RPO-95 Rear Panel Output $395.00 e-QUOTE
500-VA 500-VA 500VA 5KV 100mA AC Drive $395.00 e-QUOTE
TP-950 TP-950 HV Test Pistol for 95X Series $295.00 e-QUOTE
TL-209 TL-209 Standard HV Alligator Clip Test Lead $85.00 e-QUOTE
HSS-1 HSS-1 High Side Sense, for measuring grounded DUT's $495.00 e-QUOTE
* Insert a message
* Insert your name
* Insert your email address

Reviews

There are no reviews yet

Would you like to submit yours?

Be the first to review “Vitrek 950i HiPot Ground Bond Testers” Cancel reply

Your email address will not be published.

*

*

Cart

  • No products in the cart.

Contact

Phone: 858-756-8742

Email: sales@atequip.com

Fax: 858-759-0157


copyright 2013 - ATEquip.com

HOME // SUPPORT // TERMS AND CONDITIONS // ABOUT // CONTACT US
designed by Armand Gilbert