PIECAL 532 mA-Volts Diagnostic Loop Calibrator
$1,295.00 $1,217.00
PIECAL 532 mA-Volts Diagnostic Loop Calibrator is the most technically advanced tool for calibration, test, and diagnosing process loop’s leakage current.
Product Description
PIECAL 532 mA-Volts Diagnostic Loop Calibrator
PIECAL 532 mA-Volts Diagnostic Loop Calibrator also features Diagnostic Ground Leak Detection
PIECAL 532 mA-Volts Diagnostic Loop Calibrator Competitive Advantages over Altek 934
The Practical Instrument Electronics (PIE) Model PIECAL 532 mA-Volts 
Diagnostic Loop Calibrator is the most technically advanced tool for calibration, test, and diagnosing process loops. The PIECAL 532 brings even more and better features you would expect from a loop calibrator but by adding leakage current diagnostics moves it into a whole new “Must Have” stratosphere. Make adjustments with the EZ-Dial™ knob or test limits with the Dual Action EZ-Check™ switch. Powerful ramping functions are only a button away on the Model 532. Save potentially hours of troubleshooting time on problem loops with the PIECAL 532’s unique Loop Diagnostic Mode, only available at PIE! In Loop 
Diagnostic Mode, the loop current, voltage, impedance, AC voltage, and mode of operation are all displayed simultaneously eliminating the need of a DMM connection. Loop diagnostics is available in every mode of operation and truly is a diagnostic monitor, as parameters are continuously updated in real time. The smart diagnostic tool even indicates the most likely cause of loop failure! Loop Diagnostic features the ability to measure ground fault error caused by faulty wiring, flooded conduit and corrosion bridges.
PIECAL 532 mA-Volts Diagnostic Loop Calibrator Benefits:
- True ±0.012% of reading accuracy
- Source and Read 0.000-24.000 mA
- Simulate 2-Wire Transmitters
- Power 2-Wire Transmitters and Read 0.000-24.000mA
- Display current in mA or -25.00-125.00 % of 4-20 mA
- Read 0.00 to ± 30.00 VDC with 4X over range ability
- Source 0.000 to 24.000 VDC with up to 20mA output
- Direct Calibration 1.000V to 5.000V
- Auto Step or Ramp
- Selectable step sizes, time in-between steps & soak time
- Stop watch like EZ-Check™ switch
- Full 5 Digit Display
- Uses 1 – 9Volt alkaline battery
- Superior battery life of 40 hours under typical continuous usage
- Easy access to battery compartment
- 240 VAC Tolerant
- HART® protocol compatibility mode
- Power on selectable 250Ω resistor in series with the output for compatibility with HART® protocol enabled devices.
- AC adaptor, carrying case, and Test Data available
- NIST Traceable Calibration Certificate included FREE
PIECAL Calibrators Catalog PIECAL 532 Datasheet
| PIECAL Model | Description | List Price | Value Price | e-Quote for Discount Price |
|---|---|---|---|---|
| PIECAL 134 | Piecal 134 Pocket Sized MilliAmp 4-20mA Loop Calibrator | $645.00 | $619.00 | e-QUOTE Discount Price |
| PIECAL 334 | Piecal 334 4-20mA Loop Calibrator | $695.00 | $653.00 | e-QUOTE Discount Price |
| PIECAL 334PLUS | Piecal 334Plus 4-20mA Loop Calibrator w/Leakage Detector, Auto. Stepping & Ramping, HART Resistor | $845.00 | $811.00 | e-QUOTE Discount Price |
| PIECAL 434 | Piecal 434 Automated 4-20mA Loop Calibrator with Loop Diagnostics | $995.00 | $945.00 | e-QUOTE Discount Price |
| PIECAL 525 | PIECAL 525 T/C & RTD Calibrator, RTD Wire Kit, Case, NIST | $1545.00 | $1483.00 | e-QUOTE Discount Price |
| PIECAL 525B | Pie 525B Automated Thermocouple & RTD Calibrator | $1545.00 | $1483.00 | e-QUOTE Discount Price |
| PIECAL 532 | Piecal 532 4-20 mA/Voltage Loop Calibrator with Loop Diagnostics | $1295.00 | $1217.00 | e-QUOTE Discount Price |
| PIECAL 535 | Piecal 535 4-20/10-50 mA Dual Range Loop Calibrator | $3,495.00 | $3355.00 | e-QUOTE Discount Price |
| PIECAL 211 | PIECAL 211 Multiple RTD Type Calibrator | $995.00 | $945.00 | e-QUOTE Discount Price |
| PIECAL 311 | PIECAL 311 Multiple Type Automated RTD Read & Source Calibrator | $1,395.00 | 1311.00 | e-QUOTE Discount Price |
| PIECAL 510B | PIE 510B Single Type, 0.1° Resolution RTD Simulator | $565.00 | $531.00 | e-QUOTE Discount Price |
| PIECAL 511B | PIE 511B 10 Type, 0.1° Resolution RTD Simulator | $635.00 | $609.00 | e-QUOTE Discount Price |
| PIECAL 525 | PIECAL 525 T/C & RTD Calibrator, RTD Wire Kit, Case, NIST | $1545.00 | $1483.00 | e-QUOTE Discount Price |
| PIECAL 322-1 | PIE 322-1 Four Thermocouple Type Calibrator (Type J, K, T, E & mV/1°) | $995.00 | $945.00 | e-QUOTE Discount Price |
| PIECAL 422 | PIECAL 422 Multiple Thermocouple Type Calibrator for 8 Types, mV/0.1° | $1,295.00 | $1217.00 | e-QUOTE Discount Price |
| PIECAL 520B | PIE 520B Single Thermocouple Type Calibrator | $565.00 | $542.00 | e-QUOTE Discount Price |
| PIECAL 521B | PIECAL 14 Multiple Thermocouple Type Calibrator | $635.00 | $609.00 | e-QUOTE Discount Price |
| PIECAL 541 | PIECAL 541 Frequency Calibrator with Totalizer | $1,345.00 | $1277.00 | e-QUOTE Discount Price |
| PIECAL 820 | PIECAL 820 Multifunction Single Channel Calibrator | $1,895.00 | $1781.00 | e-QUOTE Discount Price |
| PIECAL 820ELITE | PIECAL 820ELITE Highly Accurate Multifunction Diagnostic Calibrator | $2395.00 | $2251.00 | e-QUOTE Discount Price |
| PIECAL 830 | PIE 830 High Accuracy Multifunction Diagnostic Process Calibrator with Dual Display | $2,895.00 | $2799.00 | e-QUOTE Discount Price |
| PIECAL 850 | PIECAL 850 10-50 mA Multifunction Process Calibrator | $5,495.00 | $5165.00 | e-QUOTE Discount Price |
