Product Description
PIECAL 434 mA Diagnostic Loop Calibrator
PIECAL 434 mA Diagnostic Loop Calibrator also features Ground Leak Detection
PIECAL 334 mA Loop Diagnostic Calibrator Competitive Advantages over Altek 434
Practical Instrument Electronics PIECAL 434 mA Diagnostic Loop Calibrator does much more than ordinary 0-24mA loop calibrators. The 434 features:
♦ CALIBRATE MILLIAMP INSTRUMENTS
Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA
Read 0.00 to 52.00 mA
Read -99.99 to 99.99 V
Simulate 2-Wire Transmitter, Power & Read Transmitters
Menu Selectable 250 Ohm resistor for HART compatibility
♦ CALIBRATES WITH HIGHER ACCURACY
Accurate to ±(0.01% of Reading + 0.002 mA)
♦ EASTY-TO-READ BACKLIT DISPLAY
♦ LOCATE LOOP CURRENT LEAKAGES
Automatic indication of Loop Current and Leakage Current. Measure ground current leakage from faulty wiring, flooded conduit and corrosion bridges. Leakage typically appears as a Zero Shift and helps you decide if the transmitter needs calibration or if there is a problem in the loop wiring.
♦ FASTER CALIBRATIONS
Three output EZ-CHECK switch
2 speed EZ-DIAL
Stepping & Ramping
Includes Rubber Boot & Test Leads
♦ INCLUDES RUBBER BOOT & TEST LEADS
PIECAL 434 mA Diagnostic Loop Calibrator performs Ground Leak Detection
Have you ever replace a “faulty” transmitter only to find the problem was somewhere else in the loop? And did you end up throwing the transmitter away after you fixed the other problem “just in case” the transmitter was faulty? If you have some loops that are erratic after it rains, there may be moisture present in a junction box where insulation has broken down. Select the PIECAL 434 mA Diagnostic Loop Calibrator’s Ground Leak Detection and use the PIECAL 434 to power up the loop. Any current that isn’t controlled by the transmitter or other current control element will be indicated as leakage on the PIECAL 434 display. Additional The PIECAL 434 powers up 2-Wire transmitter or loops and indicates the total current and the uncontrolled current. This provides invaluable information useful in troubleshooting loop errors.
PIECAL Calibrators Catalog PIECAL 434 Calibrator Datasheet
Advantages of the PIECAL 434 mA Diagnostic Loop Calibrator over the Altek 434
♦ MORE ACCURATE THAN THE ALTEK 434
♦ DETECTS LOOP CURRENT LEAKAGES
Measure ground current leakage from faulty wiring, flooded conduit and corrosion bridges. Leakage appears as a Zero Shift and helps you decide if the transmitter needs calibration or if there is some problem in the loop wiring
♦ MORE RESISTANT TO ACCIDENTAL DAMAGE
Rubber Boot and Stronger Switches
♦ Less Expensive Battery Changes
Four versus six “AA” batteries
♦ INCLUDES CERTIFICATE OF CALIBRATION
All PIECAL Calibrators come with a free signed and dated certificate. Altek’s come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.
PIECAL Model | Description | List Price | Value Price | e-Quote for Discount Price |
---|---|---|---|---|
PIECAL 134 | Piecal 134 Pocket Sized MilliAmp 4-20mA Loop Calibrator | $645.00 | $619.00 | e-QUOTE Discount Price |
PIECAL 334 | Piecal 334 4-20mA Loop Calibrator | $695.00 | $653.00 | e-QUOTE Discount Price |
PIECAL 334PLUS | Piecal 334Plus 4-20mA Loop Calibrator w/Leakage Detector, Auto. Stepping & Ramping, HART Resistor | $845.00 | $811.00 | e-QUOTE Discount Price |
PIECAL 434 | Piecal 434 Automated 4-20mA Loop Calibrator with Loop Diagnostics | $995.00 | $945.00 | e-QUOTE Discount Price |
PIECAL 525 | PIECAL 525 T/C & RTD Calibrator, RTD Wire Kit, Case, NIST | $1545.00 | $1483.00 | e-QUOTE Discount Price |
PIECAL 525B | Pie 525B Automated Thermocouple & RTD Calibrator | $1545.00 | $1483.00 | e-QUOTE Discount Price |
PIECAL 532 | Piecal 532 4-20 mA/Voltage Loop Calibrator with Loop Diagnostics | $1295.00 | $1217.00 | e-QUOTE Discount Price |
PIECAL 535 | Piecal 535 4-20/10-50 mA Dual Range Loop Calibrator | $3,495.00 | $3355.00 | e-QUOTE Discount Price |
PIECAL 211 | PIECAL 211 Multiple RTD Type Calibrator | $995.00 | $945.00 | e-QUOTE Discount Price |
PIECAL 311 | PIECAL 311 Multiple Type Automated RTD Read & Source Calibrator | $1,395.00 | 1311.00 | e-QUOTE Discount Price |
PIECAL 510B | PIE 510B Single Type, 0.1° Resolution RTD Simulator | $565.00 | $531.00 | e-QUOTE Discount Price |
PIECAL 511B | PIE 511B 10 Type, 0.1° Resolution RTD Simulator | $635.00 | $609.00 | e-QUOTE Discount Price |
PIECAL 525 | PIECAL 525 T/C & RTD Calibrator, RTD Wire Kit, Case, NIST | $1545.00 | $1483.00 | e-QUOTE Discount Price |
PIECAL 322-1 | PIE 322-1 Four Thermocouple Type Calibrator (Type J, K, T, E & mV/1°) | $995.00 | $945.00 | e-QUOTE Discount Price |
PIECAL 422 | PIECAL 422 Multiple Thermocouple Type Calibrator for 8 Types, mV/0.1° | $1,295.00 | $1217.00 | e-QUOTE Discount Price |
PIECAL 520B | PIE 520B Single Thermocouple Type Calibrator | $565.00 | $542.00 | e-QUOTE Discount Price |
PIECAL 521B | PIECAL 14 Multiple Thermocouple Type Calibrator | $635.00 | $609.00 | e-QUOTE Discount Price |
PIECAL 541 | PIECAL 541 Frequency Calibrator with Totalizer | $1,345.00 | $1277.00 | e-QUOTE Discount Price |
PIECAL 820 | PIECAL 820 Multifunction Single Channel Calibrator | $1,895.00 | $1781.00 | e-QUOTE Discount Price |
PIECAL 820ELITE | PIECAL 820ELITE Highly Accurate Multifunction Diagnostic Calibrator | $2395.00 | $2251.00 | e-QUOTE Discount Price |
PIECAL 830 | PIE 830 High Accuracy Multifunction Diagnostic Process Calibrator with Dual Display | $2,895.00 | $2799.00 | e-QUOTE Discount Price |
PIECAL 850 | PIECAL 850 10-50 mA Multifunction Process Calibrator | $5,495.00 | $5165.00 | e-QUOTE Discount Price |