Product Description

Instek APS-7100 Programmable AC Power Sources 1000VA 45-500Hz

Instek APS-7100 Programmable  Power Sources 1000VA 45-500Hz  with 9 Measurement Test Functions

The Instek APS-7100 Programmable AC Power Sources provide an output frequency range of 45~500Hz. The maximum rated output for APS-7100 is 1000VA, 310Vrms, 8.4Arms. Additionally, the APS-7050 is 500VA, 310Vrms, 4.2Arms. Also the optional collocation is extendable to the maximum output voltage of 600Vrms and maximum output frequency of 999.9Hz. The APS-7100 offers nine measurement and test functions:

• Volts Vrms
• Amps Irms
• Frequency
• Peak Current Ipk
• Watts
• Power Factor PF
• Volt-Amps VA
• IPK Hold
• Crest Factor

Consequently, it provides a user interface similar to that of an AC Power Meter. Also, the APS-7100 can switch several sets of current levels to increase small current measurement resolution. This application is ideal for the LED industry and standby mode power consumption test.

• Programmable Linear AC Power Source APS-7100
• AC Voltage Range: 0~155Vrms, 0~310Vrms
• AC Current Range: 8.4/4.2A(APS-7100), 4.2A/2.1A (APS-7100)
• Max. Power Range: 1000VA
• Additionally, Measurement Test Functions: Vrms, Irms, F, Ipk, W, VA, PF, Ipk hold, CF
• Rack Height: 2U
• Also, Interfaces: USB Host, LAN, GPIB(Opt), RS232/USB CDC(Opt)

Instek’s APS-7100 Meets Test Criteria for Line Voltage Fluctuation Testing

To meet the test criteria of line voltage fluctuation often seen in consumer electronics, APS-7100 supplies a stable source of AC Voltage. In addition, they also features five methods to cope with special purpose or abnormal voltage, frequency, and phase. There are ten sets of the Simulate mode simulate power outage, voltage increase, and voltage drop. Furthermore, these ten sets of the Sequence mode allow users to define parameters and produce sine wave by editing steps. Ten sets of the Program mode can edit AC waveform outputs. Also, they can define the ceiling and floor level of measurement items for different DUTs. The Ramp Control additionally allows users to set the variation speed for output voltage rise and fall. Also, the Surge/Dip Control simulates DUT’s input power producing a Surge/Dip voltage overlapping with output voltage waveform at a specific time.

Instek APS-7100 Programmable AC Power Sources Features:

• APS-7050: 500 VA, 310 Vrms; 4.2 / 2.1 Arms
• APS-7100: 1000 VA, 310 Vrms; 8.4 / 4.2 Arms
• 3 inch TFT-LCD Display, Only 88mm (2U) case height
• Also, Arbitrary Waveform Function
• Surge/Dip control for output artificial surges or dips in voltage to a DUT
• Additionally, Measurement function comprises Voltage, Current, Power, Apparent Power, Current (peak), IPKH, Frequency, Power Factor, Crest Factor
• 10 sets of presets in the Sequence mode, Simulate mode, and Programming mode
• Also, Support Sequence, Simulate, and Program to automatically execute output
• Additionally, Supports SCPI Emulation, LabVIEW Driver
• Standard interface: USB Host, LAN
• Also supports remote control: Sync Output, Program mode signal output, Trigger In/Out, and Output
• USB, LAN standard. GPIB, additionally RS-232 is optional
• Two-year warranty

Mail for Quote  sales@atequip.com | Instek_APS-7000_E-Datasheet