Product Description
FLUKE 9150 Thermocouple Calibration Furnace
FLUKE 9150 Thermocouple Calibration Furnace ~ All types of Thermocouples
The FLUKE 9150 Thermocouple Calibration Furnace uses Hart’s own microprocessor-based controller for great stability and set-point accuracy. It has a removable well insert for versatility. It has rapid cool-down and heat-up times. And it comes with an RS-232 port for connection to a PC. Calibration applications include all types of Thermocouples.
FLUKE 9150 Thermocouple Calibration Furnace ~ High Stability
FLUKE 9150 Thermocouple Calibration Furnace provides a stability of ±0.5 °C. It has a temperature range to 1200 °C (2192°F) with a display accuracy of ±5 °C across its entire range to 2192°F. With four interchangeable temperature blocks, you can check thermocouples as small as 1/16″ diameter.
The Hart Scientific 9150 Thermocouple Calibration Furnace can be used for calibrating Thermocouple and RTD temperature probes. Calibrations may be done over a range of 150°C to 1200°C (302°F to 2192°F). Temperature display of the 9150 is 0.1 degrees below 1000°and 1 degrees above 1000°.
FLUKE 9150 Thermocouple Calibration Furnace Displays Well Temperature Continuously
The controller uses a Type S Thermocouple as a sensor and controls the well temperature with a solid state relay driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The calibrator’s multiple fault protection devices insure user and instrument safety and protection. The 9150 calibrator furnace was designed for portability, low cost, and ease of operation. Through proper use, the instrument will provide continued accurate calibration of temperature sensors and devices.
FLUKE 9150 Thermocouple Calibration Furnace Product Highlights:
- Rapid heating and cooling
- Interchangeable multiple hole probe sleeves
- Convenient handle
- RS-232 interface
- Temperature scan rate control
- Eight set-point memory
- Adjustable readout in °C or °F
Each FLUKE 9150 Thermocouple Calibration Furnace Unit Includes:
- Insert A (5 others available)
- RS-232 and 9930 Interface-it control software
FLUKE 9150 ~ Plug & Calibrate
Plug in the Fluke 9150, switch it on, set the temperature with the front-panel buttons, and insert your probe into the properly sized well. Compare the reading of your device to the display temperature or to an external reference, and the difference is the error in your device. The Fluke 9150 a single well with multiple holes so you can use one for a reference thermometer to increase accuracy. Four different wells are available so be sure to specify A or B or C or D when ordering.
FLUKE 9150 Thermocouple Calibration Furnace Features:
- 50°C to 660°C (122°F to 1220°F)
- Accuracy to ±0.5°C F.S
- 150mm well depth (5.9″)
- Rapid heating and cooling
- RS-232 interface capability
- Temperature scan rate control
- NIST Accuracy Calibration
- Adjustable readout in °C or °F
FLUKE 9150 Thermocouple Calibration Furnace Purchase Includes:
9150 Dry-well ● Power Cord ● User’s Guide with Report of Calibration ● RS-232 Cable ● 9930 Interface-it Software ● Insert “A” 9150-INSA
FLUKE 9150 Thermocouple Calibration Furnace Specifications | ||
Range | 150 °C to 1200 °C (302 °F to 2192 °F) | |
Accuracy | ± 5 °C |
|
Stability | ± 0.5 °C |
|
Display Resolution |
0.1°C to 999.9° | 1°C above 1000° | |
Heating Times | 35 minutes from to 1200°C | |
Cooling Times | 140 minutes with block | |
Inserts | Insert A, B, C, or D, One included (specify when ordering) | |
Well Depth |
140 mm (5.5 in); (101 mm [4 in] removable insert plus 38 mm [1.5 in] insulator) | |
Power Supply | 115 V (± 10 %) 1200 W |
|
Dimensions | (12.4x 8.2 x 12.4 in) | |
Weight | 13kg (28 lb) | |
Computer Interface | RS-232 Interface/SW-9930 | |
NIST Traceable Calibration Data |
150 °C, 300 °C,450 °C,600 °C, 800 °C, 1000 °C, and 1200 °C |
The Fluke 9150 has four fixed hole insert blocks available providing up to 4 block-wells with diameters from 1/16″ to 1/2″.
INSERT | 9150 WELL HOLE SIZES |
9150-INSA | 1/16″- 1/8″- 3/16″ – 1/4″ – 3/8″ – 1/2″ |
9150-INSB | (2ea)-3/16″, (2ea)- 1/4″, (2ea) -3/8″ Holes |
9150-INSC | Six (6ea) 1/4″ Holes |
1943-INSD | (2)- 3 mm, (2) 4 mm, (2) 6mm Holes |
Temperature Scales
Fluke Dry Block, Dry Well Calibrator Model and Description | LIST PRICE | SALES PRICE | e-Quote Discount Price |
---|---|---|---|
Fluke 9100S Handheld Dry-Well C, 35C to 375C (95F to 707F), NIST | $2125.00 | $2015.00 | e-QUOTE Discount Price |
Fluke 9009 Dual Block Calibrator Cold -15°C to 350C° ~ Hot 50°C to 350°C Dry Block Dry-Well | $6,282.00 | $5965.00 | e-QUOTE Discount Price |
FLUKE 9011 Range: Low -30°C to 140°C | 100°C to 650°C High Dual Insert Dry-Well | $14,345.00 | $13,625.00 | e-QUOTE Discount Price |
FLUKE 9101 Range: 0°C (32°F) ±0.005°C Ice Point Dry-Well | Discontinued | Discontinued | e-QUOTE Discount Price |
FLUKE 9102-S Range: -10Cto 122C(14F to 252F) Handheld Dry-Well | $3,494.00 | $3283.00 | e-QUOTE Discount Price |
FLUKE 9103-A Range: –25 °C to 140 °C (–13 °F to 284 °F) Mid Range Dry-Well | $3,535.00 | $3258.00 | e-QUOTE Discount Price |
FLUKE 9140A Range: 35 °C to 350 °C Field Portable Dry-Well | $3,295.00 | $3041.00 | e-QUOTE Discount Price |
Fluke 9142A Range: 23 °C: –25 °C to 150 °C (–13 °F to 302 °F) Field Portable | $6,595.00 | $6173.00 | e-QUOTE Discount Price |
FLUKE 9143-A Range: 33 °C to 350 °C (91 °F to 662 °F) Mid-Temp Field Calibrator Dry-Well | $5,170.00 | $4863.00 | e-QUOTE Discount Price |
FLUKE 9144A Range: 50 °C to 660 °C (122 °F to 1220 °F) High Temp Field Calibrator Dry-Well | $5,570.00 | $5234.00 | e-QUOTE Discount Price |
FLUKE 9150-A Range: 150 °C to 1200 °C (302 °F to 2192 °F) Furnace Dry-Well | $8,745.00 | $8261.00 | e-QUOTE Discount Price |
FLUKE 9170-A Range: –45 °C to 140 °C(–49 °F to 284 °F) Low Range Dry-well | $11,265.00 | $10,635.00 | e-QUOTE Discount Price |
FLUKE 9171-A Range: –30 °C to 155 °C(–22 °F to 311 °F) Low-Mid Range Dry-Well | $10,095.00 | $9525.00 | e-QUOTE Discount Price |
FLUKE 9172-A Range: 35 °C to 425 °C Mid-Range Dry-Well | $7,760.00 | $7250.00 | e-QUOTE Discount Price |
FLUKE 9173-A Range: 50 °C and 700 °C High Accuracy Dry-Well | $9,695.00 | $8934.00 | e-QUOTE Discount Price |
FLUKE 9190 range: –95 °C to 140 °C Ultra Cool Dry-Well | Discontinued | e-QUOTE Discount Price |