FLUKE 9140 Dry Well Dry Block Temperature Calibrator
$3,456.00 $3,282.00
The FLUKE 9140 Dry Well Dry Block Calibrator ~Field Portable
The FLUKE 9140 Dry Well Dry Block Calibrator is a portable light weight (6lbs) model providing both a broad calibration range (35°C to 350°C) with high accuracy of ±0.25°C.
Product Description
FLUKE 9140 Dry Well Dry Block Temperature Calibrator
Dry Well Dry Block Calibrator FLUKE 9140 ~ Field Portable
The FLUKE 9140 Dry Well Dry Block Temperature Calibrator is a light weight (6-lbs) field portable calibrator. It provides both a broad dynamic calibration range as well as high accuracy. Additionally it comes with the proprietary Hart Scientific temperature controller design. The 9140 has a display resolution of 0.1 degrees, an accuracy of ±0.05°C with a stability of ±0.05°C@350°C. Also, the stabilization time is just seven minutes! The Temperature range is from 35°C to 350°C (95°F to 662°F). So it’s perfect for calibrating RTDs, dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient.
Plug & Calibrate ~ FLUKE 9140 Dry Well Dry Block Temperature Calibrator
Switch on Fluke 9140. Set the temperature via front-panel buttons, and insert your probe into the properly sized well. Next, compare the reading of your device to the display temperature or to an external reference. Most significant, the difference is the error in your device. The Fluke 9140 is a single well calibrator with multiple probe holes. In fact, you can use one for a reference thermometer to increase accuracy. Actually, four different wells are available so be sure to specify A or B or C or D when ordering.
Also the Fluke 9140’s battery pack option provides four hours of field use when AC power is unavailable. The two wells accommodates a wide variety of inserts. Consequently, you can calibrate most any sensor whose diameters are from 1/16″ to 5/32″ in 1/16″ increments.
FLUKE 9140 Dry Well Dry Block Calibrator Features:
- -10°C to 122°C
- Most noteworthy, the accuracy is ±0.05°C at 0°C and additionally ±0.1°C at 122°C
- 102mm well depth (4″)
- Also rapid heating and cooling
- RS-232 interface capability
- Additionally, Temperature scan rate control
- NIST Accuracy Calibration at –10°C, 25°C, 50°C, 55°C, 100°C, and 122°C
- Adjustable readout in °C or °F
- Also, Switchable power (±10 %), 2.2 A, switchable, 50/60 Hz, 500 W
Dry Well Hand-Held Calibrator Purchase Includes w/9140:
- Power Cord
- User’s Guide
- Also Report of Calibration
- RS-232 Cable
- 9930 Interface-it Software
- Also, Insert “A” 9140-2
Stability±0.03°C@50°C | ±0.05°C@350°CWell-to-Well Uniformity±0.1°C with sensors of similar size at equal depths within wellsWell Depth4.875 inches (124 mm)Heating Times12 minutes from ambient to 350°CCooling Times15 minutes from 350°C to 100°CInsertsInsert A, B, C, or D included (specify when ordering)Power Supply115 VAC (±10 %), 4.4 A or 230 VACDimensions5.63″ x 10.25″ x 9.63″Weight2.7 kg (6 lb.)
Fluke 9140 Dry Well Dry Block Calibrator Specifications |
|||||
| Range | 35 °C to 350 °C (95 °F to 662 °F) | Accuracy | ±0.5 °C | ±1 °C(holes greater than 1/4″) | ||
| Computer Interface | RS-232 Interface/SW-9930 | ||||
| NIST Traceable Calibration Data |
50 °C, 100 °C, 150 °C, 200 °C, 250 °C, 300 °C, and 350 °C |
||||
The Fluke 9140 has four fixed hole insert blocks available providing 4 wells with diameters from 1/16″ to 1/2″.
| INSERT# | HOLE SIZES |
| A 9140-2 | 1/16-1/8-3/16-1/4-3/8-1/2 in. | 1.6-3.2-4.8-6.35-12.7 mm |
| B 9140-3 | (2)- 3/16″-4.8 mm, (2)- 1/4″-6.35 mm, (2)-3/8″- 9.5 mm |
| C 9140-4 | Six (6) 1/4″ (6.35 mm) |
| D 9140-6 | (2)- 3 mm, (2) 4 MM, (2) 6MM |
Temperature Scales
| Fluke Dry Block, Dry Well Calibrator Model and Description | LIST PRICE | SALES PRICE | e-Quote Discount Price |
|---|---|---|---|
| Fluke 9100S Handheld Dry-Well C, 35C to 375C (95F to 707F), NIST | $2125.00 | $2015.00 | e-QUOTE Discount Price |
| Fluke 9009 Dual Block Calibrator Cold -15°C to 350C° ~ Hot 50°C to 350°C Dry Block Dry-Well | $6,282.00 | $5965.00 | e-QUOTE Discount Price |
| FLUKE 9011 Range: Low -30°C to 140°C | 100°C to 650°C High Dual Insert Dry-Well | $14,345.00 | $13,625.00 | e-QUOTE Discount Price |
| FLUKE 9101 Range: 0°C (32°F) ±0.005°C Ice Point Dry-Well | Discontinued | Discontinued | e-QUOTE Discount Price |
| FLUKE 9102-S Range: -10Cto 122C(14F to 252F) Handheld Dry-Well | $3,494.00 | $3283.00 | e-QUOTE Discount Price |
| FLUKE 9103-A Range: –25 °C to 140 °C (–13 °F to 284 °F) Mid Range Dry-Well | $3,535.00 | $3258.00 | e-QUOTE Discount Price |
| FLUKE 9140A Range: 35 °C to 350 °C Field Portable Dry-Well | $3,295.00 | $3041.00 | e-QUOTE Discount Price |
| Fluke 9142A Range: 23 °C: –25 °C to 150 °C (–13 °F to 302 °F) Field Portable | $6,595.00 | $6173.00 | e-QUOTE Discount Price |
| FLUKE 9143-A Range: 33 °C to 350 °C (91 °F to 662 °F) Mid-Temp Field Calibrator Dry-Well | $5,170.00 | $4863.00 | e-QUOTE Discount Price |
| FLUKE 9144A Range: 50 °C to 660 °C (122 °F to 1220 °F) High Temp Field Calibrator Dry-Well | $5,570.00 | $5234.00 | e-QUOTE Discount Price |
| FLUKE 9150-A Range: 150 °C to 1200 °C (302 °F to 2192 °F) Furnace Dry-Well | $8,745.00 | $8261.00 | e-QUOTE Discount Price |
| FLUKE 9170-A Range: –45 °C to 140 °C(–49 °F to 284 °F) Low Range Dry-well | $11,265.00 | $10,635.00 | e-QUOTE Discount Price |
| FLUKE 9171-A Range: –30 °C to 155 °C(–22 °F to 311 °F) Low-Mid Range Dry-Well | $10,095.00 | $9525.00 | e-QUOTE Discount Price |
| FLUKE 9172-A Range: 35 °C to 425 °C Mid-Range Dry-Well | $7,760.00 | $7250.00 | e-QUOTE Discount Price |
| FLUKE 9173-A Range: 50 °C and 700 °C High Accuracy Dry-Well | $9,695.00 | $8934.00 | e-QUOTE Discount Price |
| FLUKE 9190 range: –95 °C to 140 °C Ultra Cool Dry-Well | Discontinued | e-QUOTE Discount Price |
