Product Description
Fluke 805FC Vibration Meter
Fluke 805FC Vibration Meter ~ Bearing Vibration Screening Instrument
The Fluke 805FC Vibration Meter bearing screening device is available for front line mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall bearing vibration and condition.
Fluke 805FC Vibration Meter with Crest Factor + takes the confusion out of assessment. The original Crest Factor is used by vibration analysts to identify faults. It is defined as the ratio of the peak value/RMS value of a time domain vibration signal. A key limitation of using Crest Factor to identify faults is that the Crest Factor does not increase linearly as the degrades. In fact, the Crest Factor can actually decrease as a nears catastrophic failure due to large RMS values. In order to overcome this limitation, Fluke uses a proprietary algorithm known as Crest Factor + (CF+). CF+ values range from 1 to 16. As the condition worsens, the CF+ value increases. To keep things simple, the Fluke 805FC Vibration Meter has also included a four-level severity scale that identifies the health as Good, Satisfactory, Unsatisfactory or Unacceptable. Now, you can make go/no-go maintenance decisions with complete documented confidence.
The Fluke 805FC Vibration Meter is perfect reliable repeatable way for checking and analyzing mechanical performance for:
Fluke 805FC Vibration Meter ~Chiller (refrigeration application)
- Reciprocating (Open motor and compressor separate)
- Reciprocating (Hermetic motor and compressor)
- Centrifugal (Hermetic or Open Motor
Fluke 805FC Vibration Meter ~Fans Analysis
- Belt-driven Fans 1800 to 3600 RPM
- Belt-driven fans 600 to 1799 RPM
- General direct drive fans (direct coupled)
- Vacuum blowers (belt or direct drive)
- Large forced draft fans (fluid film brgs.)
- Large induced draft fans (fluid film brgs.)
- Shaft-mounted integral fan (extended motor shaft)
- Axial flow fans (belt or direct drive)
Fluke 805FC Vibration Meter ~Cooling tower drives application
- Long, hollow drive shaft (motor)
- Belt drive (motor and fan – all arrangements
- Direct drive (motor and fan – all arrangements
Centrifugal Pumps
Note: height is measured from grade to top motor
- Vertical pumps (12’ to 20’ height)
- Vertical pumps (8’ to 12’ height)• Vertical pumps (5’ to 8’ height)
- Vertical pumps (0’ to 5’ height)
- Horizontal centrifugal end suction pumps – direct coupled
- Horizontal centrifugal double suction pumps – direct coupled
- Boiler feed pumps (turbine or motor driven)
Positive Displacement Pumps
- Positive displacement horizontal piston pumps (under load)
- Positive displacement horizontal gear pumps (under load)Air compressors
- Reciprocating
- Rotary screw
- Centrifugal with or without external gearbox
- Centrifugal – internal gear (axial meas.)
- Centrifugal – internal gear (radial meas.)
Blowers
- Lobe-type rotary blowers (belt or direct drive)
- Multistage centrifugal blowers (direct drive)
Generic gearboxes (rolling element s)
- Single stage gearbox
Machine tools
- Motor
- Gearbox input
- Gearbox output
- Spindles – roughing operations
- Spindles – machine finishing
- Spindles – critical finishing
Fluke_805FC_Specifications Download Free Adobe Reader
Fluke 805FC Vibration Meter Transports Trend Data to Track Machine Health
The Fluke 805FC Vibration Meter Exports Trend data in Excel Trending, or repeated vibration measurements kept in a spreadsheet over time, is the best method to track machine health. With the Fluke 805FC Vibration Meter you can easily:
• Export your result to Excel through USB connection
• Trend the readings with the prebuilt Excel templates and plot graphs
• Compare the overall vibration readings to ISO Standards (10816-1, 10816-3, 10816-7)Import measurements from the 805FC Vibration Meter to an Excel template on your PC in order to trend the parameters: overall vibration, CF+, and temperature. Looking at just the number alone for the overall vibration or temperature might not be of much benefit to the operator or technician if they don’t know what the number means. The user may not know what is normal or what indicates a problem. If measurements taken on the operator rounds are easily loaded into Excel, then the trend will show patterns of something that is becoming abnormal. The user can now see a clear picture of the changing condition and deteriorating health of the machine.
The Purchase of each Fluke 805FC Vibration Meter Includes:
- USB cable
- Storage case
- Belt holster
- Quick reference guide
- CD(includes MS Excel template and documentation)
- Two (2) AA batteries
The MSRP list price for the Fluke 805FC Vibration Meter is $2149.95. For a healthy price discount email ATEquip for a return email quotation.