Ametek-Jofra MTC-650A Marine Temperature Calibrator
Ametek Jofra MTC-650A Marine Temperature Calibrator (33 to 650°C) (91 to 1202°F)
The Ametek Jofra MTC-650A Marine Temperature Calibrator features a large back lit display that is easy to read even in well-lit areas. Ametek Jofra MTC-650A feature an informative display that provides icons and information regarding the status of the MTC and the calibration in-progress. The MTC series also features an auto-step function.
Using this function you may stay in the control room or on the bridge and monitor the temperature reading while the calibrator, located in the engine room by the sensor, automatically steps through a number of pre-programmed temperatures.
Ametek Jofra MTC-650A Marine Temperature Calibrator Heats from (33 to 650°C) (91 to 1202°F) in just 10 Minutes
Ametek Jofra MTC-650A Marine Temperature Calibrator provides extremely fast heating and cooling
The MTC-650A and MTC320A contain an innovative heating block profile. This design heats up the MTC-320A to 320°C in just 4 minutes and the MTC650A to 650°C in only 10 minutes. The fast performance of the heating block is due to the special profile that minimizes mass and yet, still accepts an insertion tube with a 1 in (26 mm) outer diameter. This design is a balanced compromise between temperature stability, homogeneity, and rapid heating and cooling.
MTC-650A Heating Time
(33 to 650°C) (91 to 1202°F ) ……….4 minutes
MTC-650A Cool Down Time
(650 to 100°C) (1202 to 212°F) ..28 minutes
Engine Rooms – Testing the Temperature in Exhaust Gas Savings
The exhaust gas temperature is a very important factor. If the temperature is too low, too little fuel is let into the cylinder, and if the temperature is too high, too much fuel is let into the cylinder. Often a range of ±10°C (50°F) is allowed, before an alarm is activated. However, if calibration is performed more often, this range could be reduced and a more economical combustion could be achieved.
Ametek Jofra MTC-650A Marine Temperature Calibrator Features and Benefits:
» Fast calibration is time saving ~ The specially designed heating block profile heats up to 320°C / 608°F in just 4 minutes and to 650°C / 1202°F in only 10 minutes
» High flexibility ~ You are not limited by fixed holes.
Inter-changeable insertion tubes are used to match the diameter of your sensor under-test
» Time Saving features ~ Fast one-key-one-function access to the
automatic switch test and auto stepping
» Documentation made easy ~ RS232 communication and JOFRACAL
calibration software are included in the standard delivery
» Complete marine program ~ Part of a complete program of marine
approved temperature, pressure and signal calibrators; including temperature sensors. DNV approval ~ All JF Instruments calibrators are marine type approved by Det Norske Veritas.
Ametek Jofra MTC-650A Marine Temperature Calibrator
Model Number Ordering System
The Ametek Jofra MTC-650A Marine Temperature Calibrator Model Number Ordering System consists of 6 choice of M0dels Numbers, 2 Choices of Main Power, 9 different available Power Cords, 29 types of Inserts, 4 calibration types and 2 Accessory choices. A representative P/N CTC650A115B60F450GC which translates to JOFRA CTC-650A, 115VAC, USA 115 power cord, 60F450 insert, G calibration certificate, and C- carrying case option.
The total number of available model numbers is then 6x2x9x29x4x2=75,168 P/N’s. It borders on impractical to list all of the available models so please contact ATEquip for a price and delivery quotation for our liberal discount. Refer to the part numbering system list on the datasheet to construct the exact CTC calibrator of your choice.
MSRP Prices start at ~$4,105.00 but are available at significant discounts from ATEquip.
Datasheet Ametek_MTC_Dry_Block Email for Quote firstname.lastname@example.org
|MTC-650A||Ametek Jofra MTC-650A Marine Temperature Calibrator Dry Block (33 to 650°C) (91 to 1202°F) Accuracy (±0.4°C / ±0.7°F )||$3553.00||$3899.00||e-QUOTE MTC-650A|
|MTC-320A||Ametek Jofra MTC-320A Marine Temperature Calibrator Dry Block (33 to 320°C) (91 to 608°F) Accuracy (±0.5°C / ±0.9°F )||$3480.00||$3299.00||e-QUOTE MTC-350A|
|MTC-140A||Ametek Jofra MTC-140A Marine Temperature Calibrator Dry Block (-17 to 140°C) (-1 to 284°F) Accuracy (±0.4°C / ±0.7°F )||$3480.00||$3299.00||e-QUOTE MTC-140A|
|ETC-400R||Ametek Jofra ETC-400R Infrared Temperature Calibrator (28 to 400°C)(82 to 752°F) Accuracy (±0.3°C / ±0.54°F )||$2,645.00||$2,512.00||e-QUOTE ETC-400R|
|ETC-125A||Ametek Jofra ETC-125A Easy Temperature Calibrator (-10 to 125°C)(-14 to 257°F) Accuracy (±0.5°C / ±0.9°F ) Small Portable||$2675.00||$2514.00||e-QUOTE ETC-125A|
|CTC-1200A||Ametek Jofra CTC-1200A Compact Temperature Calibrator (300 to 1205°C)(572 to 2200°F)Accuracy (±2.0°C / ±3.6°F)||$6,975.00||$6,626.00||e-QUOTE CTC-1200A|
|CTC-650A||Ametek Jofra CTC-650A Compact Temperature Calibrator (33 to 650°C)(91 to 1202°F) Accuracy (±0.9°C / ±1.62°F)||$3,740.00||$3,553.00||e-QUOTE CTC-650A|
|CTC-650B||Ametek Jofra CTC-650B Compact Temperature Calibrator Deep Immersion (33 to 650°C)(91 to 1202°F)Accuracy (±0.6°C / ±1.08°F)||$4490.00||$4265.00||e-QUOTE CTC-650B|
|CTC-320A||Ametek Jofra CTC-320A Compact Temperature Calibrator (33 to 320°C)(91 to 608°F)Accuracy (±0.5°C / ±1.62°F)||$3,480.00||$3,299.00||e-QUOTE CTC-320A|
|CTC-320B||Ametek Jofra CTC-320B Compact Temperature Calibrator Deep Immersion (33 to 320°C)(91 to 608°F)Accuracy (±0.5°C / ±0.9°F)||$4,695.00||$4460.00||e-QUOTE CTC-320B|
|CTC-140A||Ametek Jofra CTC-140A Compact Temperature Calibrator (-17 to 140°C)(-1to 284°F) Accuracy (±0.4°C / ±0.7°F)||$3865.00||$3,671.00||e-QUOTE CTC-140A|
|ITC-650A||Ametek ITC-650A (33 to 650°C)( 91 to 1202°F) Accuracy (±0.45°C/±0.81°F)||$6,220.00||$5,899.00||e-QUOTE RTC-650|
|ITC-320A||Ametek ITC-320A (33 to 320°C)( 91 to 608°F) Accuracy (±0.25°C/±0.45°F)||$5,825.00||$5,533.00||e-QUOTE ITC-320A|
|ITC-155A||Ametek ITC-155A (-39 to 155°C)( -38 to 311°F) Accuracy (±0.18°C/±0.32°F)||$6,220.00||$5,899.00||e-QUOTE ITC-155A|
|PTC-660||Ametek PTC-660 (33 to 660°C )(1 to 1220°F) Accuracy to ±0.06°C||$7,590.00||$7,210.00||e-QUOTE PTC-660|
|PTC-350||Ametek PTC-350 (33 to 350°C)( 91 to 662°F) Accuracy to ±0.06°C||$6,450.00||$6127.00||e-QUOTE PTC-350|
|PTC-155||Ametek PTC-155 (-25 to 155°C )(-22 to 311°F) Accuracy to ±0.06°C||$7460.00||$7087.00||e-QUOTE PTC-155|
|PTC-125||Ametec PTC-125 Cooler (-90 to 125°C )(-130 to 257°F) Accuracy (±0.07°C (±0.013°F)||$11,160.00||$10,599.00||e-QUOTE PTC-125|
|RTC-700||Ametek RTC-700(A)(B)(C) is the highest accuracy performing Dry-block calibrator available.( EURAMET/cg-13/v.01)( 33 to 660°C)||$8,860.00||$8,417.00||e-QUOTE RTC-700|
|RTC-159||Ametek RTC-159 (-100°C to 155°C & -148 to 311°F)||$18,770.00||$17,831.00||e-QUOTE RTC-159|
|RTC-158||Ametek RTC-158 (-22 to 155°C)(-13 to 311°F) High Accuracy ±0.04°C||$11,285.00||$10,720.00||e-QUOTE RTC-158|
|RTC-250||Ametek RTC-250 (28 to 250°C)(82 to 482°F) High Accuracy ±0.04°C||$11,285.00||$10,720.00||e-QUOTE RTC-250|
|RTC-157||Ametek RTC-157 (-45°C to 155°C)( -49°F to 311°F) High Accuracy ±0.04°C||$8,690.00||$8,255.00||e-QUOTE RTC-157|
|RTC-156||Ametek RTC-156 ( -30 to 155°C)( -22 to 311°F) High Accuracy ±0.04°C||$8,705.00||$8217.00||e-QUOTE RTC-156|