AMPTEC EED Igniter Safe Ohmmeter Testers
AMPTEC EED Igniter Safe Ohmmeter Testers product line provides a

AMPTEC EED Igniter Safe Ohmmeter Testers
Family of Aerospace, Defense and Commercially Approved Electronic Explosive Device (EED) Safe Ordinance Igniter Testers
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620A-4
Amptec 620A-4 Fail-Safe Ohmmeter EED
The AMPTEC 620A-4 Fail-Safe Ohmmeter (and the AMPTEC 620A4R Water Resistant version) is a portable, battery powered 4 ½ digit DC Ohmmeter that safely measures electrical resistance for use on a variety of potentially hazardous devices. It has been specifically designed to test squibs, igniters, flares, airbags, explosive bolts, etc.
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620LM
Amptec 620LM Explosive Safety EED Igniter Tester
The AMPTEC 620LM Explosive Safety EED / Igniter Tester is for full automated systems use. The product does not have any front panel user push buttons or power switches or measurement terminals. All measurement activity is via the rear panel connections and includes the optically isolated RS232C remote control interface and a dedicated connector fitted OP247 isolated continuous operating power. The ranges on the 620LM are the following: a 2.0 Ohm, 20 Ohm, 2.0 KOhm, 20 Meg Ohm (for open circuit isolation determinations) and diode test function. Diode test is used to safely determine the status of a squib in series with a diode.
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620VL
Amptec 620VL Explosive Safety Igniter Tester
The AMPTEC 620VL Explosive Safety EED Igniter Tester is a portable digital milli-ohmmeter specifically designed for ultra-safe resistance testing on explosive devices (i.e. squibs, igniters, flares, explosive bridge wire and detonators) that also have a diode in series with the explosive element. With 4 ½ digit resolution, and multiple ranges up to 2.0 Megohms, the AMPTEC 620VL provides ordnance…
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620VN
Amptec 620VN Explosive Safety Igniter Tester
The AMPTEC 620VN Explosive Safety EED Igniter Tester (in the 620A series of is a portable fail-safe milli-ohmmeters) is specifically designed for ultra-safe resistance testing on explosive devices (i.e. squibs, igniters, flares, explosive bridge wire and detonators). It offers one of the best continuous decade resistance ranges of 20 Ω, 200 Ω, 2.0 KΩ, 20 KΩ, 200 KΩ, and 2.0 MΩ ranges
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620GB
AMPTEC 620GB Intrinsically Safe EED Igniter Tester Ohmmeter-Milli-Ohmmeter
The AMPTEC 620GB Intrinsically Safe EED Igniter Tester Ohmmeter ~ Milli-Ohmmeter is specifically designed for ultra-safe resistance testing on explosive devices (i.e. squibs, igniters, flares, explosive bridge wire and detonators) that also have a diode in series with the explosive element. With 4 ½ digit resolution, and multiple ranges up to 20 Megohms, the AMPTEC 620GB provides ordnance safe resistance measurements for the EED detonators.
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 601ES
Amptec 601ES Explosive Safety Digital Multimeter (DMM)
The AMPTEC 601ES Digital Multi-Meter is a NASA and USAF range safety approved EED DMM. Safely measures AC/DC Voltage – 600 V RMS to 0.1 mV RMS, AC/DC Current to 2.0 amperes, DC resistance 2.0 Ohms (0.0001Ω resolution), 20Ω, 200 Ohms, 2.0 KΩ & 20 KΩ. The 601ES DMM has built-in self test signal sources and built-in analog meter to verify DMM’s stray voltage and current measurement integrity and more.
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620A-4R
Amptec 620A-4R Ruggedized Intrinsically-Safe EED Tester
The 620A-4R Water Resistant Safety Ohmmeter (Igniter Tester) is electrically identical to the US Air Force safety board approved AMPTEC 620A-4 Igniter Tester circuitry. It has had its circuitry reviewed and approved by U.S.A.F. NonNuclear Munition Safety Board for use on all NonNuclear Munitions.
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620BH
Amptec 620BH Fail-Safe Ohmmeter
The AMPTEC 620BH Low Resistance EED Fail Safe Igniter Tester is a portable digital fail-safe ohmmeter which has been specifically designed to remain inert in the event of an internal failure for ultra-safe resistance testing on current sensitive devices (i.e. squibs, igniters, flares, airbags, explosive bolts).
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620BH
Amptec 620EH Fail-Safe Ohmmeter
The AMPTEC 620EH Low Resistance EED Explosive Safety Igniter Tester is a portable digital ohmmeter which has been specifically designed for ultra-safe resistance testing on explosive devices (i.e. squibs, igniters, flares, detonators, warheads). The 620EH is primarily for indoor lab use.
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620ES
Amptec 620ES Intrinsically-Safe EED Tester
The AMPTEC 620ES Low Resistance EED Explosive Safety Igniter Tester is a portable digital fail-safe ohmmeter Igniter Tester which has been specifically designed for ultra-safe resistance testing on explosive devices (i.e. squibs, igniters, flares, detonators, warheads, etc.).
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620RK
Amptec 620RK Programmable EED Tester
The AMPTEC 620RK is a Fail-Safe EED Milli-Ohmmeter specifically designed for ultra-safe resistance testing on explosive devices (i.e. squibs, igniters, flares, detonators). The 620RK can be continuously operated 24 Hrs a day. Ranges: 20.0Ω, 200.0Ω, 200.0KΩ.
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620BH
Amptec 620UK Intrinsically Safe Ohmmeter and EED Tester
The 620UK Low Resistance Explosive Safety Ohmmeter/Igniter Tester is a portable Intrinsically Safe Explosive Safety Digital Ohmmeter. It was specifically designed (and US NAVY and UK Ministry of Defense EEX Approved) for the safe use in Explosive and Volatile Environments to replace the Fairey Mk7 ohmmeter for ultra-safe resistance testing. EX II 2G and EEx-ib-IIc-T4 Download Data…
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 630BN
Amptec 630BN Intrinsically-Safe EED Tester
The AMPTEC 630BN Igniter Tester is approved for use on US NAVY TOMAHAWK Cruise Missile and STANDARD Missile squibs by the NAVAL ORDNANCE CENTER. Download Data Sheet Ind AMPTEC 630BN Multipurpose EED Tester / Ruggedized Intrinsically-Safe Meter Designed for military ordnance programs as a ruggedized EED/Igniter Tester, the AMPTEC 630BN features: a completely water-resistant main operation panel;…
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 630ES
Amptec 630ES Intrinsically-Safe EED Tester
The 630ES Intrinsically-Safe EED Tester is a ruggedized, water-resistant, portable digital fail-safe ohmmeter which have been specifically designed for ultra-safe resistance testing on explosive devices (i.e. squibs, igniters, flares, detonators).
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 640N
Amptec 640N Intrinsically-Safe, Ruggedized EED Tester
The AMPTEC 640N Intrinsically-Safe EED Tester is ruggedized, water-resistant, portable and was specifically designed for ultra-safe resistance testing on explosive devices (i.e. Tomahawk Cruise Missile Evolved Sea Sparrow Missile rocket motor squibs, igniters, flares, detonators). Failsafe Ohmmeter Floats in Water! The 640N case is water proof when the lid is closed.
AMPTEC EED Igniter Safe Ohmmeter Testers ~ AMPTEC 620SL
Amptec 640SL Ruggedized Intrinsically-Safe EED Tester
The AMPTEC 640SL EED Safe Igniter Tester measures electrical resistance using a 2.0Ω, 20.0Ω, 2.0 KΩ, 200 KΩ 2.0 MΩ and a 20.0 MΩ full scale ranges and more…
Amptec Research manufactures intrinsically safe electronic measurement instrumentation to the highest degree of customer satisfaction. Our mission is to be the premier manufacturer of superior testing equipment. We proudly have over three decades of product development and experience providing solutions in unique world-wide government and aerospace environments. Simply, we make better products because we know our market better than any other manufacturer.