|
|
 GW Instek GPC Series Triple Output Power Supplies |
| Model |
GW Instek Triple output -Triple DC Power Supplies |
Specs |
Man |
List |
Price |
| Instek GPC-1850D |
DC Power Supply -Dual 0~18V, 0~3A and 5V/3A outputs~~TRIPLE OUTPUT |
|
|
$460.00 |
|
| Instek GPC-3030D |
DC Power SupplyDual 0~30V, 0~3A and 5V 3A outputs~TRIPLE OUTPUT |
|
|
$460.00 |
|
| Instek GPC-3060D |
DC Power SupplyDual 0~30V, 0~6A and 5V 3A outputs~~TRIPLE OUTPUT |
|
|
$825.00 |
|
| Instek GPC-6030D |
DC Power SupplyDual 0~60V, 0~3A and 5V 3A outputs~~TRIPLE OUTPUT |
|
|
$825.00 |
|
| Instek GPC-3030DQ |
Discontinued Replaced by GPS-3303 |
|
|
|
|
|
Please-mail ATEquip.com for Product Availability or a Price and Delivery Quotation. Thank you.
|
|
NIST Traceable Calibration Certificates Available
|
|
To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for all of the GW INSTEK products, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited/ ISO 17025 accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest. |
|
Model |
Independent |
FixedOutput |
Series |
Parallel |
Instek GPC-1850D |
0~18V x 2 & 0~5A x 2 |
5V@3A |
36V 5A |
18V 10A |
Instek GPC-3020D |
|
|
|
|
Instek GPC-3030D |
0~30V x 2 & 0~3A x 2 |
5V@3A |
60V 3A |
30V 6A |
Instek GPC-3030DQ |
|
|
|
|
Instek GPC-6030D |
0~60Vx2 & 0~3Ax2 |
5V@3A |
120A~3A |
60V~6A |
|
|
|
GW Instek GPC Series Triple Output~134Watts-195Watts-375Watts
 FEATURES
|
 Triple Output
Auto Tracking
Auto Series and Parallel Operation
Constant Voltage and Constant Current Operation
Low Ripple and Noise
Two Digital Panel Meters
Internal Select for Continuous or Dynamic Load
Overload and Reverse Polarity Protection |
The Instek GPC Triple Output DC Power Supplies Series are regulated DC power supply designed for use in applications such as
powering operational amplifier, push-pull stages, logic circuit and definition systems where
plus & minus voltages are required to track with an insignificant error. The tracking error for the, Instek GPC-1850D, GPC-3030D, GPC-3060D, and GPC-6030D is within </= 0.5% + 10mV of the master.
The GPC Series DC Power Supplies consists of two identical independently adjustable power supplies. A front panel switch selects the mode of operation:
Independent Voltage/Series Current/Parallel |
Instek GPC Series Triple Output DC Power Supply Specifications |
OPERATION MODE |
Independent |
Two independent outputs and 5V fixed output
Output from 0 to double rated amperes at rated volts |
Series
Parallel |
Output from 0 to rated volts and 0 to rating amperes
Output from 0 to rated volts at rating amperes each
Output from 0 to double rated volts at rated amperes |
5VOLT FIXED OUTPUT |
Line Regulation |
</= 5mV |
Load Regulation |
</= 10mV |
Ripple & Noise |
</= 2mVrms |
Voltage Accuracy |
5V±0.25V |
Output Current |
3A |
TRACKING OPERATION |
Tracking Error |
</= 0.5% + 10mV of the master |
Series Regulation |
</= 300mV |
CONSTANT VOLTAGE OPERATION |
Line Regulation |
</= 0.01% + 3mV |
Load Regulation |
</= 0.01% + 3mV (rating current 3A) |
|
</= 0.02% + 5mV (rating current 10A) |
Ripple & Noise |
</= 1mVrms 5Hz ~ 1MHz |
Recovery Time |
</=100 usec ( 50% Load change, Minimum load 0.5A |
CONSTANT CURRENT OPERATION |
Line Regulation |
</= 0.2% + 3mA |
Load Regulation |
</= 0.2% + 3mA |
Ripple Current |
</= 3mArms |
DIGITAL METER |
Display |
3½ digits 0.5" LED display |
Display |
3½ digits 0.39" LED display (for GPC-3030DQ) |
Accuracy |
± (0.5% of rdg + 2 digits ) |
INSULATION |
Chassis/Terminal |
20MΩ or above ( DC 500V ) |
Chassis/AC Cord |
30MΩ or above ( DC 500V ) |
POWER SOURCE |
AC Mains |
AC 100V/120V/220V/240V +_10%, 50/60Hz |
ACCESSORIES |
Test Leads |
GTL-105 x 1 ( 3A ) |
GTL-104 x 2 ( 10A ) |
European Test Lead |
GTL-203 x 1 |
GTL-204 x 2 |
Manual |
Instruction x 1 |
Power cord x 1 |
Dimensions |
|
255(W) x 145(H) x 346(D) mm |
|
|
|
| |
|
|
|
|
|
|
