FEATURES GW Instek GOS-6200 Oscilloscope

200MHz Bandwidth, Dual Channel, Delayed Sweep

Auto Set

Built-in 6 Digits Universal Counter

Cursor Readout with 7 Measurements

10 Sets Memory for Front Panel Setting Save & Recall

TV-Line Selection (NTSC, PAL, SECAM)

Panel Setup Lock of Digital-Control Functions

Buzzer Alarm

LED Indicators

Trigger Signal Output

Z-axis Modulation Input

SMD Technology, High Stability and Reliability

Instek GOS-6200 200MHz Oscilloscope
SPECIFICATIONS

     CRT

Type

6-inch rectangular type with internal Graticule;
0%, 10%, 90% and 100% markers. 8 x 10 DIV (1 DIV=1 cm)

Phosphor

P31

Accelerating Potential

14 kV approx.

Illumination

Continuously adjustable

Z-axis input

Coupling : DC

Sensitivity : 5V or more

Maximum input voltage : 30V (DC+AC peak) at 1kHz or less

Bandwidth : DC ~ 5MHz

VERTICAL SYSTEM

Sensitivity

2mV ~ 5V/DIV,11 step in 1-2-5 sequence

Sensitivity Accuracy

< 3% (5 DIV at the center of display)

Vernier Vertical Sensitivity

Continuously variable to 1/2.5 or less panel-indicate value

Bandwidth(-3dB)

DC ~ 200MHz (2mV/DIV : DC ~ 20MHz)

Rise Time

1.75nS (2mV/DIV : 17.5 nsec)

Signal Delay

Leading edge can be monitored

Max. Input Voltage

400V (DC+AC peak) at 1kHz or less

Input Coupling

AC, DC, GND

Input Impedance

1MΩ+2%// approx. 25pF

Vertical Mode

CH1, CH2, DUAL (CHOP/ALT), ADD, CH2 INV.

Bandwidth Limited

20MHz

Common-Mode Rejection Ratio

50 :1 or better at 50kHz

Dynamic Range

8 div at 100MHz；5 div at 200MHz

HORIZONTAL SYSTEM

Horizontal Modes

MAIN(A), ALT, DELAY(B)

A(main)Sweep Time

20nS ~ 0.5S / DIV, continuously variable (UNCAL)

B(delay)Sweep Time

20nS ~ 50mS/DIV

Accuracy

+ 3% (+ 5% at x 10 MAG)

Sweep Magnification

x 10 (maximum sweep time 2nS / DIV)

Hold Off Time

Variable

Delay Time

1µS ~ 5S

Delay Jitter

Better than 1:20000

Alternate Separation

Variable

TRIGGER

Trigger Modes

AUTO, NORM, TV

Trigger Source

CH1, CH2, LINE, EXT, EXT/10

Trigger Coupling

AC, DC, HFR, LFR, NR

Trigger Slope

"+" or   "-" polarity or TV sync polarity

Trigger Sensitivity

Trigger Level Range

INT :±4DIV or more; EXT :±0.4V or more；EXT/10 :±4V or more

TV Triggering

Mode : TV-V, TV-H, TV-LINE

TV-Line Selection

Max. External Input Voltage

400V (DC+AC peak) at 1kHz

External Input Impedance

1MΩ + 5%, // approx. 25pF

X-Y OPERATION

Mode

X-axis : selectable CH1, EXT, EXT/10

Y-axis : selectable CH1, CH2, CH1 and CH2

Sensitivity Accuracy

2mV ~ 5V / DIV ±3%； EXT : 0.1V / DIV±5%； EXT / 10 :1V / DIV±5%

X-axis Bandwidth

DC ~ 500kHz (-3dB)

Phase Error

3º or less from DC ~ 50kHz

OUTPUT SIGNAL

Trigger Signal Output

Voltage : approx. 25mV/DIV into 50Ω

Frequency response : DC ~ 10MHz

Calibrator Output

1kHz Square wave, 2Vpp±2%

Cursor Readout Function

Qwer980-J  

ΔV，ΔV%，ΔVdB，ΔT，1/ΔT，ΔT%，Δθ

Cursor Resolution

1 / 100 DIV

Effective Cursor Range

Vertical : ±3DIV ; Horizontal : ±4DIV

Panel Setting Display

Vertical : V/DIV(CH1,CH2), UNCAL, ALT/CHOP/ADD, INV, probe factor, AC/DC/GND

Horizontal : S/DIV(MTB,DTB), UNCAL, x 10MAG, delay time, HO

Trigger : source, coupling, slope, level, TV-V, TV-H

Others : X-Y, lock, save/recall MEM 0-9

AUTO MEASUREMENTFUNCTION

Parameter Function

FREQ, PERIOD, ±WIDTH, ±DUTY ( + or - polarity selected by trigger slope)

Display Digits

Max. 6-digits, decimal

Frequency Range

50Hz ~ 200MHz

Accuracy

1kHz ~ 200MHz : +0.01%；50Hz ~ 1kHz : +0.05%

Measuring Sensitivity

>2 div (Measuring source selected from CH1 and CH2 as synchronous signal sources)

     SPECIAL FUNCTION

Auto Set

Input Channel : CH1, CH2；Frequency Response 50Hz~50MHz

Panel Setting Save & Recall

10 sets

Panel Setups Lock

Provided

     POWER SOURCE

AC 100V / 120V / 230V + 10%, 50 / 60Hz

     ACCESSORIES

Power cord x 1;
Instruction manual x 1;
Probes(10:1/1:1) x 2

DIMENSIONS

310(W) x 150(H) x 470(D) mm;

WEIGHT

Approx. 9kg