SPECIFICATIONS Instek GDS-810C 2 Channel 100MHz Digital Oscilloscope Color LCD |
DISPLAY SYSTEM |
Display Device |
Color (320 x 240)
5.7 inch LCD |
Display Contrast |
Adjustable |
Waveform Display Graticule |
8×10 divisions ( 8 x 12 div, when menu off ) |
Display Mode |
Dot, Vector, Accumulate |
VERTICAL SYSTEM |
Bandwidth |
100MHz |
Channels |
2 |
Vertical Resolution |
8-Bit |
Vertical Sensitivity |
2mV/div ~ 5V/div |
Vertical Accuracy |
±3% |
Rise Time |
＜3.5ns |
Input Coupling |
AC、DC、Ground |
Input Impedance |
1MΩ ±2%, ~ 18pF |
Polarity |
Positive & Negative |
Maximum Voltage Between Signal & Common at Input BNC |
300V ( DC+AC peak ), CATII |
Waveform Signal Process |
CH1+CH2、CH1-CH2、FFT |
Offset Range |
2mV/div ~ 50mV/div：±0.5V
100mV/div ~ 500mV/div：±5V
1V/div ~ 5V/div：±50V |
BW Limit |
20MHz ( -3dB ) |
HORIZONTAL SYSTEM |
Time Base Range |
1ns/div ~ 10s/div (1-2-5 increments) |
Time Base Mode |
Main、Window、Window Zoom、Roll、X-Y |
Time Base Accuracy |
±0.01% |
Delay Range |
Pre-trigger : 20 div maximum; Post-trigger : 1000 div |
SIGNAL ACQUISITION SYSTEM |
Real-Time Sample Rate |
100MS/s maximum on each channel |
Equivalent Sample Rate |
25GS/s E.T. maximum on each channel |
Record Length |
125k/CH |
Peak Detection |
10ns (500ns/div~10s/div) |
Acquisition Mode |
Sample、Peak Detect、Average |
Average |
2, 4, 8, 16, 32, 64, 128, 256 |
TRIGGER |
Trigger Source |
CH1, CH2, Line, Ext |
Mode |
Auto Level、Auto、Normal、Single、TV、Time Delay、Event Delay、Edge、Pulse Width |
Coupling |
AC, DC, HF, LF, Noise Reject |
Sensitivity |
DC~25MHz : 0.5div or 5mV
25MHz~100MHz : Approx 1.5div or 15mV |
X-Y MODE |
X-Axis Input / Y-Axis Input |
Channel 1 / Channel 2 |
Phase Shift |
±3° at 100kHz |
CURSOR & MEASUREMENT |
|
Auto Voltage Measurement |
Vpp，Vamp，Vavg，Vrms，Vhi，Vlo，Vmax，Vmin |
Auto Time Measurement |
Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
Cursor Measurement |
Voltage difference between cursors(ΔV)
Time difference between cursors(ΔT)
Frequency difference between cursors(1/ΔT) |
FREQUENCY COUNTER |
|
Readout Resolution |
6 digits |
Frequency Range |
AC Coupled, 20Hz to rated bandwidth; resolution : 10Hz |
Signal Source |
All available trigger source except the Pulse Width & Video Trigger mode |
ADJUSTABLE PROBE COMPENSATION SIGNAL |
Frequency Range |
1kHz ~ 100kHz, 1kHz, step |
Duty Cycle |
5% ~ 95%, 5%, step |
EXTERNAL TRIGGER |
|
Range |
±15V |
Sensitivity |
DC~25MHz : ~50mV ; 25~100MHz：~100mV |
Input Impedance |
1MΩ±2%, ~ 18pF |
Maximum Input |
300V ( DC+AC peak ) , CATII |
CONTROL PANEL FUNCTION |
|
AutoSet |
"Autoset" can adjust Vertical ( Volt/div ), Horizontal ( Sec/div ) and Trigger level automatically |
Save/Recall |
Up to 15 sets of measurement conditions can be saved and recalled |
Waveform Trace Save/Recall |
2 sets of waveform can be saved and recalled |
INTERFACE |
|
Standard |
RS-232C |
Option Opt.01 |
GPIB |
Option Opt.11 |
USB, Printer Port, Go/NoGo Output
(Opt.01 and Opt.11 are exclusive) |
POWER SOURCE |
|
|
100V ~ 240V AC 47Hz ~ 63Hz, Auto selection |
ACCESSORIES |
|
User manual x 1
Power Cord x 1
GTP-060A-2 Probe(10:1/1:1) x 2 |
DIMENSIONS &WEIGHT |
|
|
310(W) x 142(H) x 254(D)mm
Approx. 3.8kg |
