 Instek GD-1022 GDS-1042 GDS-1062 GDS-1102 Digital Storage scopes ~Oscilloscopes |
Instek Portable Digital Storage scopes GDS-122 |
| Model |
GW Instek Digital Oscilloscopes |
data |
man |
List |
Sale |
| Instek GDS-1022 |
Digital Osilloscope -25MHz, 1GS/s, 2 Ch. USB Port. |
|
|
$469.00 |
|
| Instek GDS-1042 |
Digital Osilloscope -40MHz, 1GS/s, 2 Ch. USB Port. |
|
|
$659.00 |
|
| Instek GDS-1062 |
Digital Osilloscope -60MHz, 1GS/s, 2 Ch. USB Port. |
|
|
$759.00 |
|
| Instek GDS-1102 |
Digital Osilloscope -1005MHz, 1GS/s, 2 Ch. USB Port. |
|
|
$949.00 |
|
| |
|
|
|
|
|
| Instek GDS-122 |
Digital Osilloscope -20MHz, 1GS/s, 2 Ch. USB Port. |
|
|
$799.00 |
|
| Instek GDS-122 |
PC Software Down Load |
|
|
|
|
Please-mail ATEquip.com for Product Availability or a Price and Delivery Quotation. Thank you.
|
|
To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for all of the GW INSTEK products, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited/ ISO 17025 accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest.
|
Instek GDS-1022~GDS-1102 DigitalStorageOscilloscopes |
|
Instek GDS-1022 GDS-1042 GDS-1062 GDS-1102 Digital Storage Oscilloscope Specifications |
VERTICAL |
|
GDS-1022 |
GDS-1042 |
GDS-1062 |
GDS-1102 |
|
|
|
|
<14ns |
<8.75ns |
<5.8ns |
<305ns |
|
| Channels |
2 |
| Sensitivity |
2mV/div ~ 5V/div (1-2-5 increments) |
Accuracy
|
±(3% x |Readout|+0.1 div + 1mV) |
| Input Coupling |
AC, DC & Ground |
Input Impedance
|
1M±2%, ~16pF |
| Polarity |
Normal & Invert |
Maximum Input
|
300V (DC+AC peak), CATII |
| Waveform Signal Process |
+ , - , FFT |
Offset Range
|
2mV/div ~ 50mV/div : ±0.4V
100mV/div ~ 500mV/div : ±4V
1V/div ~ 5V/div : ±40V |
| Bandwidth Limit |
20MHz (-3dB) |
TRIGGER |
| Sources |
CH1 , CH2 , Line , EXT |
Modes
|
Auto, Normal, Single, TV, Edge, Pulse Width |
| Coupling |
AC , DC , LF rej. , HF rej. , Noise rej. |
| Sensitivity |
DC ~ 25MHz : Approx. 0.5div or 5mV |
EXT TRIGGER |
| Range |
±15V |
| Sensitivity |
DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV |
| Input Impedance |
1MΩ±2% , ~ 16pF |
| Maximum Input |
300V (DC AC peak) , CATII |
HORIZONTAL |
| Range |
1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
| Modes |
Main, Window, Window Zoom, Roll, X-Y |
| Accuracy |
±0.01% |
| Pre-Trigger |
10 div maximum |
| Post-Trigger |
1000 div |
X-Y MODE |
| X-Axis Input |
Channel 1 |
Y-Axis Input
|
Channel 2 |
| Phase Shift |
±3° at 100kHz |
SIGNAL ACQUISITION
|
| Real-Time Sample Rate |
250MSa/s maximum |
| Equivalent Sample Rate |
25GSa/s maximum |
| Vertical Resolution |
8 Bits |
| Record Length |
4K Dots maximum |
Acquisition Mode
|
Normal, Peak Detect, Average |
Peak Detection
|
10ns (500ns/div ~ 10s/div) |
Average
|
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
CURSORS AND MEASUREMENT |
| Voltage Measurement |
Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot |
| Time Measurement |
Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle |
| Cursors Measurement |
Voltage difference between cursors (ΔV)
Time difference between cursors (ΔT) |
Auto Counter
|
Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the Video trigger mode |
CONTROL PANEL FUNCTION
|
| Autoset |
Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level |
| Save Setup |
Up to 15 sets of measurement conditions |
Save Waveform
|
15 sets of waveform |
DISPLAY
|
| TFT LCD Type |
5.6 inch |
Display Resolution
|
234 (Vertically) x 320 (Horizontally) Dots |
Display Graticule
|
8 x 10 divisions |
Display Brightness
|
Adjustable |
INTERFACE
|
| USB Slave Connector |
USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) |
| SD Card Slot |
Image (BMP), waveform data (CSV), and setup (SET) |
POWER SOURCE
|
Line Voltage Range
|
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
MISCELLANEOUS
|
| Multi-Language Menu |
Available |
| Online Help |
Available |
|
| ACCESSORIES |
User manual x 1
Power Cord x 1
GTP-060A-2 Probe(10:1/1:1) x 2 |
| DIMENSIONS &WEIGHT |
310(W) x 142(H) x 140(D)mm
Approx. 2.5kg |
|
|
|
|
|
Please-mailATEquip.com for Product Availability or a Price and Delivery Quotation. Thank you.
|
|
|
|
|
