C BM25, BM400,
cart
atequip logo
Fluke portable 43B Power Quality Analyzer

Main Menu
 
New Product
Products
43B Fluke Portable Power Quality Analyzer 43B
Please-mail ATEquip.com for Product Availability or a Price and Delivery Quotation. Thank you.

Fluke 43B Power Quality Analyzer

Fluke 43B Power Analyzer

The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power
systems, troubleshoot power problems and diagnose equipment failures. All in a rugged
handheld package.

  • New! NiMH Battery provides extended operating time of 6.5 hours
  • Combines the most useful capabilities of a power quality analyzer, multimeter and scope
  • Calculates 3-phase power on balanced loads, from a single-phase measurement
  • Trends voltage, current, frequency, power harmonics and captures voltage sags,
    transients and inrush current
  • Records two selectable parameters for up to 16 days
  • FlukeView® Software can log harmonics and all other readings over time and provides a complete harmonics profile up to the 51st harmonic
  • Complete package with voltage probes and 400 A current clamp, FlukeView Software and
    optically isolated interface cable

  		•
    • Voltage and current waveforms
    • True-rms voltage and current
    • Frequency Hz
    • Voltage, current, and power harmonics (51st)
    • Total harmonic distortion (THD)
    • Phase angle of individual harmonics
    • Watts, power factor, displacement power factor
    • Cosø, VA and VAR
    • Voltage and current waveforms
Below Accessories Supplied with Purchase of 43B Power Analyzer
  • Catch voltage transients and waveform
    distortion down to 40 nS
  • C120 Hard Case
  • TL24 Test Leads
  • AC20 Industrial Test Clips
  • AC85 Large Jaw Alligator Clips
  • TP1 Flat-tipped Slim-Reach™ Test Probes
  • TP4 4 mm Round Slim-Reach™ Test Probes
  • i400s 400 A AC Current Clamp
  • OC4USB Optically Isolated USB Interface Adapter
  • BP120MH Rechargeable NiMH Battery
  • Shielded Banana-to-BNC adapter
  • PM8907 Line Voltage Adapter/Battery Charger
  • PM8907 Line Voltage Adapter/Battery Charger
  • SW43W FlukeView® Power Quality
  • Analyzer Software for Windows
  • Power Quality CD(Includes User's Manual' Power Quality Video, Getting Started Guide,Shielded
 
Optional Accessories for Fluke 43B Power Analyzer

Inrush current up to 500A with supplied
current probe
  • C789 Soft Carrying Case
  • 80i-110s 100A AC/DC Current Probe
  • i200s AC Current Clamp
  • i1000s 1000A AC Current Clamp
  • i2000flex Flexible 2000A AC Current
    Probe
  • i3000s Clamp-On AC Current Clamp
  • VPS40 10:1 Voltage Probe
  • BB120 Two Shielded Banana-to-BNC Adapters
  • 80TK Thermocouple Module
  • 80T-150U Universal Temperature Probe
  • PAC91 Parallel Printer Adapter
  • TLK225 SureGrip® Master Accessory
    Test Lead Kit
  • TL220 63" Test Lead Set
  • TL221 Extension Lead Set
  • TL223 Electrical Test Lead Se

NIST Traceable Calibration Certificates

To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for the Fluke 43B, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited/ ISO 17025 accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest.
 
43F Fluke Power Analyzer 43B Ordering Information
Model
Product
MSRP
ATEquip Price
Fluke 43B Fluke 43B Power Analyzer (Includes Above Listed Accessories) $2695.00 $2560.00 Buy Now
Optional Accessories Please Email ATEquip for Pricing on Above Accessory P/Ns mailto: sales@atequip.com
Please-mail ATEquip.com for Product Availability or a Price and Delivery Quotation. Thank you.

Fluke 43b Specifications 43B

Input Characteristics

Input impedance

 1 MΩ, 20 pF

Voltage rating

 600V rms, CAT III

V/A/Hz Display

True-rms voltage (ac + dc)

Ranges:

 5.000 V, 50.00 V, 500.0 V, 1250 V*

Accuracy:

 ±(1% + 10 counts)

True-rms current (ac + dc)

Ranges:

 50.00 A, 500.0 A, 5.000 kA, 50.00 kA, 1250 kA

Accuracy:

 ±(1% + 10 counts)

Frequency

Ranges:

 10.0 to 15.0 kHz

Accuracy:

 ± ([% of reading] + [counts]): 0.5% + 2

CF Crest factor

Ranges:

 1.0 - 10.0

Accuracy:

 ±(5% + 1 count)

Fluke 43B Power Display

Watts, VA, VAR

 1-phase and 3-phase,3 conductor balanced loads

Ranges:

 250 W - 1.56 GW

Accuracy:

 ±(4% + 4 counts) Fundamental Power

Accuracy:

 ± (2 % + 6 counts) Total Power

PF Power Factor

Range:

 0 - 1.0

Accuracy:

 ±0.04

DPF Displacement Power Factor, Cos .F

Range:

 0.25 - 0.9

Accuracy:

 ±0.04

Range:

 0.90 - 1.0

Accuracy:

 ±0.03

H2 Frequency Fundamental

Ranges:

 40.0 to 70.0 Hz

Accuracy:

 ± ([% of reading] + [counts]): 0.5% + 2

Harmonics Display

Voltage, Current, Frequency

Ranges:

 Fundamental to 51st harmonic

Accuracy:

Fundamental:

 VA ±(3% + 2 counts) W ±(5% + 2 counts)

2 to 31st harmonic:

 VA ±(5% +3 counts) W ±(10% +10 counts)

32 to 51st harmonic:

 VA ±(15% +5 counts) W ±(30% +5 counts)

Frequency Fundamental

Ranges:

 40 Hz to 70 Hz

Accuracy:

 ±0.25 Hz

Phase

Range:

 V, A (between Fundamental & Harmonics)

Accuracy:

 ±3º to ±15º

Range:

 W (between Voltage Fundamental & Current Harmonics)

Accuracy:

 ±5º to ±15º

K-factor (Current and Power)

Range:

 1.0 to 30.0

Accuracy:

 ±10%

THD Total Harmonic Distortion

Range:

 0.00 - 99.99

Accuracy:

 ±(3% + 8 counts)

Sags and Swells

Recording times:

 4 min to 16 days (selectable)

Vrms Actual, Vrms max, min(AC + DC)

Ranges:

 5.000V, 50.00V, 500.0V, 1250V*

Accuracy:

 Readings ±(2% +10 counts); Cursor readings ± (2% + 12 counts)

Arms Actual, Arms max, min (AC + DC)

Ranges:

 50.00A, 500.0A, 5.000 kA, 50.00 kA

Accuracy:

 ±(2% +10 counts)

Transient Capture

Minimum pulse width:

 40 ns

Useful bandwidth input 1:

 DC to 1 MHz

Number of transients:

 40

Voltage threshold settings:

 20%, 50%, 100%, 200% above or below reference

Reference signal:

 After START, the Vrms and frequency of the signal are measured. From these data a pure sinewave is calculated as reference for threshold setting.

Vpeak min, Vpeak max at cursor:

 10 V, 25 V, 50 V, 125 V, 250 V, 500 V, 1250 V Accuracy: ±5% of full scale

R, C, Diode, Continuity

Resistance ranges:

 500.0 Ω, 5.000 kΩ, 50.00 kΩ, 500.0 kΩ, 5.000 MΩ, 30.00 MΩ

Resistance accuracy:

 ±(0.6% + 5 counts)

Capacitance ranges:

 50.00 nF, 500.0 nF, 5.000 µF, 50.00 µF, 500.0 µF

Capacitance accuracy:

 ±(2% + 10 counts)

Diode Ranges:

 0 to 3.000 V

Diode voltage:

Accuracy:

 ±(2% + 5 counts)

Continuity:

 Beeper on at < 30 Ω ± 5 Ω

Max current:

 0.5 mA

Temperature:

 °C or °F

Inrush Current

Inrush times:

 1 s, 5 s, 10 s, 50 s, 100 s, 5 min

Current ranges:

 1 A, 5 A, 10 A, 50 A, 100 A, 500 A, 1000 A

Cursor readings:

 A peak max at cursor 1 and cursor 2

Accuracy:

 ±5% of full scale

Time between cursors:

 4 to 235 pixels (1 pixel = inrush time/250) Accuracy: ±(0.2% + 2 pixels)

Temperature (with accessory)

Range:

 -100 °C - 400 °C

Accuracy:

 ±(0.5% + 5 counts)

Scope Display

Measurements:

 dc, ac, ac+dc, peak, peak-peak, frequency, duty cycle, phase, pulse width, crest factor

Time ranges:

 20 ns/div to 60 s/div

Max sampling rate:

 25 MS/s

Bandwidth

Voltage channel [1]:

 20 MHz at inputs, 1 MHz with TL24 Leads

Current channel [2]:

 DC to 15 kHz at inputs, 10 kHz with i400s Current Clamp

Coupling:

 AC, DC (10 Hz - 3 dB)

Vertical sensitivity:

 5 mV/div to 500V/div

Vertical resolution:

 8 bit (256 levels)

Record length:

 512 samples per channel

Base ranges:

 60 S/div to 20 nS/div ± (0.4% + 1 pixel)

Timebase modes:

 Normal, roll, single

Pre-trigger:

 Up to 10 divisions

Trigger Source:

 Input 1 or Input 2 or automatic selection

Trigger Mode:

 Automatic Connect-and-View™, Free Run, and Single Shot

Connect-and-View™:

 Advanced automatic triggering that recognizes signal patterns

 Automatically adjusts triggering, timebase and amplitude and displays stable pictures

Memories

 20 (screens, settings, data)

Recording

Recording times:

 4 min to 16 days (selectable)

Parameters:

 Choose one or two parameters from one of the groups below:

 Volts/Ampères/Hertz

Power:

 Watts, VA, VAR, PF, DPF, Frequency

 Harmonics, THD, Volts (Fund. & Harmonic), Ampères (F&H) Watts(F&H)

 Frequency (H), %(H) of total, Phase(H), KF

 Temperature

Resistance:

 Resistance, Diode, Continuity, Capacitance

Scope:

 DC Voltage, DC Current, AC Voltage, AC Current, Frequency,

 Pulse Width + or -, Phase, Duty cycle + or -, Peak max, Peak min, Peak min-max, Crest Factor

Note

 *Rated EN 61010-1 600 V CAT III CSA

Fluke 43B Environmental Specifications

Operating Temperature

 0°C to +50°C

Fluke 43B Safety Specifications

Electrical Safety

 EN 61010-1 CAT III, 600V. CSA listed

Fluke 43B Mechanical & General Specifications

Size

 232 x 115 x 50 mm

Weight

 1.1 kg

Warranty

 3 years

Battery Life

 Rechargeable NiMH pack (charger included), 6.5 hrs extended operating time (continuous)

Shock & Vibration

 Mil 28800E, Type 3, Class III, Style B

Case

 IP51 (dust, drip, waterproof)
43B Fluke Power Quality Analyzer Fluke 43B
 
 


Home     |     News     |     About Us     |     Product     |     Testimonials     |     Contact Us

 

Site Content © 2007 www.atequip.com

Site Author Hal Clark

Website Construction by www.armandgilbert.com