| |
| |
 Vitrek 930 i programmable gROUND bOND/cONTINUITY tESTER |
|
|
|
|
|
930i Ground Bond Tester and AC Low-Ohm Ohmmeter
Depend on Vitrek’s 930i, Ground Bond Tester and AC Low-Ohms Ohmmeter, for all of your programmable or manually operated electrical safety compliance tester needs for testing high current ground bond integrity, ground bond resistance, earth ground continuity and ground continuity resistance. |
Vitrek 930i More Features and Benifits |
|
 3 to 30 Amp Test Current - meets a wide variety of regulatory test specifications
Password Protected Test Routine Storage
Frequency Synthesis 50-400Hz
10mΩ Measurement Resolution - more measurement confidence and repeatability
4-wire Kelvin Sensing - eliminates lead resistance errors
Fully Programmable via front panel, hipot or computer control
|
Hipot and Ground Test from one set-up
High Speed Test throughout with actual measurement values
Display Prompted Setup - easy to use, fully adjustable
CE Mark Certified to EN61010
Made in the U.S.A.
5 Year Extended Warranty |
|
|
Programmable Features (VICL and serial com standard, PLC optional)
The Vitrek 930i Ground Bond Tester features front panel or remote computer programmable control of test current amplitude and frequency and test time duration to test the ground bond integrity and continuity of the Device Under Test (DUT). The current may be front panel or remotely programmed from 3 amps to 40 amps, from 50-400Hz and from 1-9999 seconds for DUT testing in compliance with UL and IEC specifications.
At Vitrek we believe that your investment in safety compliance test equipment is an extremely important one. We realize that today's test professional is constantly faced with changing test requirements and that is why we build versatility into each test instrument we manufacture. The Vitrek 930i Ground Continuity Analyzer is a case in point. All test parameters of the 930i are fully programmable: Output Current and Frequency, min/max Resistance Limits and Test Duration. Whether you're running the 930i from its nonvolatile test database or via computer control, ground bond testing has never been simpler or faster. The unit's password protected test database editor provides for quick and easy modification of existing tests, yet offers the security and integrity by demanding ISO 9000 quality systems.
Seamless Test Integration
The Vitrek 930i is designed to work hand-in-hand with Vitrek Hipot Testers so that dielectric testing and ground bond testing can be accomplished efficiently and effortlessly from a single test set up. The results are automatically integrated into a unified test report with overall pass/fail status as well as step-by-step results with final values. VICL and serial com are standard while PLC optional. |
|
|
Vitrek 930i Programmable Precision 200KHz Transformer Tester |
|
ADVANCED DESIGN |
- Features & Benefits
Test Frequency Up to 200kHz- Meter and Tester Modes
Large 320 x 240 LCD Display
- Programmable Test Sequence
- 20 Independent Test Channels
- Built-in Ca. Cp Analysis
- CE Mark Compliance
- Optional Multi-link Software
- Programmable Ffrequency
- 3 Year Extended Warranty
|
- Measurement Parameters
-
Transformer Inductance
- Transformer Winding Resistance
- Transformer Impedance
- Transformer Capacitance
- Transformer Turns Ratio
- Transformer Winding Polarity
- Magnetic’s Q Factor
- Phase Angle Transformer
- Winding Continuity
|
|
|
Detects Connectivity – Insulation Defects – Opens/Shorts and more…
The Vitrek V685 Hipot Cable Tester is far beyond an ordinary cable tester in that it represents a comprehensive high voltage cable systems testing solution with the uncanny ability to root out circuit connectivity and insulation defects. It is a high speed cable tester, 128 multipoint(256 optional), high voltage scanning instrument that detect opens and shorts, determines and verifies insulation resistance integrity or dielectric strength withstand, measures cable resistance and capacitance. The V685 does so with three distinct operating modes; AC Voltage Withstand (AC hipot) up to 1000VRMS, DC hipot up to 1500VDC and Insulation Resistance measurement up to 1000 Meg ohms.
When it comes to performance verification on circuit component connectivity elements, such as: connectivity of connectors, crimps, solder joints, diodes, relays, resistors and capacitors - The V685 has all the measurement capability you need to get the job done right. It performs all these functional checks on up to 128 test points with a standard test time as low as 100 mSec/point.
The intelligent learning mode of the V685, featuring auto-scan and pin search, gets you up and testing in practically no time at all. The large LCD graphic display gives you quick and easy access to all test parameters and test data. Overall test results are enunciated with a pass/fail LED indicator and internal speaker. The versatile I/O interface has, RS-232, remote PLC I/O and a printer port. |
|
Vitrek 930i Ground Bond ~ Ground Continuity Tester  |
|
Alternating Current Output
|
Range |
3 to 30 amperes RMS, programmable |
Resolution |
1 amp |
Output Frequency |
Sine wave synthesis, 50 Hz to 400Hz |
Compliance Voltage |
3 volts RMS |
Regulation |
± 0.25% no load to full load |
Resistance Measurement |
Resistance Limit |
User programmable max. and min. Test is automatically aborted when limit is exceeded. |
Resistance Range |
1Ω at 3 amps linearly decreasing to 100 mΩ at 30A |
Resistance Resolution |
10mΩ |
Measurement Accuracy |
± 1.0% of reading; ± 0.5% of range |
Accuracy |
Specifications apply for 1 year, ± 5°C from the cal temp within 20°C to 30°C |
Calibration....Option NIST |
Certificate of calibration traceable to the National Institute of Standards and Technology (NIST) provided as an Option |
Test Time |
Digital count down timer, programmable 1 to 9999 seconds |
Terminal Configuration |
True four-wire Kelvin |
General Specifications |
Remote Interface |
VICL and serial com standard. PLC optional. |
Display |
40 character dot matrix illuminated liquid crystal display |
Indicators |
L.E.D. status indicators |
Alarm |
Audible and visual alarms provide pass/fail indication |
Diagnostics |
Built-in self diagnostics test ROM, RAM and output system |
Safety |
CE mark certified to EN61010 |
Accessories |
K-2, VIC-3, BBL-2 and operator's manual supplied with unit |
Warranty |
Extended 5 year parts and labor with annual factory calibration and maintenance. Standard warranty one year. |
Operating Temperature |
0°C to 50°C |
Humidity |
90% RH 0°C to 40°C |
| Power |
115/230 VAC ± 10% 250 VA max |
Dimensions |
89mmH x 432mmW x 457mmD (3.5"H x 17"W x 18"D) |
Weight |
11Kg (24 lb.) Net/15Kg (34 lb.) Shipping |
|
|
|
|
|
ITEM |
Description |
Data Sheet |
Purchase |
930i |
Automated Ground Bond Tester |
|
$2,590.00 |
Buy Now |
EXW-2 |
2 Year Warranty, with initial purchase |
|
$295.00 |
Buy Now |
40A |
40Amp Output |
|
$395.00 |
Buy Now |
TL-115HC |
HC HV/Current 115 VAC Test Socket |
|
$250.00 |
Buy Now |
K-2 |
HC 2-wire, 2-clip Kelvin Lead Set |
|
$185.00 |
Buy Now |
K-4 |
High Current, 4-wire, 4 Clip Kelvin Lead Set |
|
$195.00 |
Buy Now |
PLC-3 |
Logic Level Interface |
|
$195.00 |
Buy Now |
RM-1 |
Rack Mount Kit |
|
$75.00 |
Buy Now |
VIC-3 |
930i to 944i Communication Cable (1 Meter) |
|
$35.00 |
Buy Now |
OM-930 |
Additional Operator's Manual |
|
$35.00 |
Buy Now |
SPK-930 |
5 Year Spare Parts Kit |
|
$295.00 |
Buy Now |
| |
|
|
|
|
|
|
|
|
|
|
|
