Fluke 112 True RMS DMM
Sized to carry anywhere in your shirt pocket or on your utility belt. Great for facilities personnel.

• Basic DC Accuracy of 0.7%
• Min/Max/Average
• Manual Reading Hold
• IEC 1010 Rating: CAT III 600V

• Accuracy	99.3% Basic DC Accuracy
  Price	$149
  Order Now Below

• 6000 Count Display
• Auto Hold and Manual Hold
• IEC 1010 Rating: CAT IV 600V/CAT III 1000V
• Battery Access Door
• Compatible with Fluke ToolPak™ Meter Hanging Kit

• Price	$209.00
  Order Now Below

Fluke 300 Series Clamp-on Meters

Fluke clamp on meters allows the user to connect directly around the cables and take measurements directly.

• Auto Shut-Off Maximizes Battery Life
• Small Body and Jaws
• Large, Backlit Display (334, 335, 336, 337)
• In-Rush Current Function (334, 335, 336, 337)
• True-RMS Versions (335, 336, 337)
• Improved Low Current Measurement Accuracy
• Display Hold feature Locks Measurements on the Display
• Three Year Warranty
• CAT III 600V

• Fluke 300 Clamp-On Meters
  Model	Voltage Range		Current Range	AC Response	Price
  331A	0 to 400.0 VAC & 400 to 600 VAC		0 to 400.0A AC	Averaging	$93.95
  332A	0 to 400.0 VAC & 400 to 600 VAC		0 to 40.00A AC 40.0 to 400.0A AC	Averaging	$101.95
  333A	0 to 600.0V AC/DC		0 to 400.0A AC	Averaging	$132.95
  334A	0 to 600.0V AC/DC		0 to 600.0A AC	Averaging	$152.95
  335A	0 to 600.0V AC/DC		0 to 600.0A AC	True-rms	$198.95
  336A	0 to 600.0V AC/DC		0 to 600.0A AC/DC	True-rms	$283.95
  337A	0 to 600.0V AC/DC		0 to 999.9A AC/DC	True-rms	$314.95
  Order Now Below

Fluke 43B Power Quality Analyzer

Advanced power system analysis in a hand-held tool

• Combines Capabilities of a Power Quality Analyzer, Multimeter and Scope
• Calculates 3-Phase Power on Balanced Loads
• Measures Power Harmonics, and Captures Voltage Sags, Transients and Inrush Current
• Records Two Selectable
• Parameters for up to 16 Days
• 20 Measurement Memories.

• Price Fluke 43B	$2,239.00
  BTC789 Soft Carring Case	$80.00
  Order Now Below

• Fluke 740 Documenting Process Calibrators
• The 740 family saves you great time if documentation is critical in your process. With the versatility of the 740 series of calibrators, you can minimize the need for additional calibrators in your plant.
  • Simultaneous Input and Output
  • Interchangeable Pressure Modules
  • Eleven T/C Curves and Eight RTD Curves (plus ohms)
  • DC input: mA, V, mV, or Frequency. For Pressure, Choose One of the 29 Interchangeable Modules from 1.0 inch water to 10000 PSI
  • Model 744 adds HART Communication capability for Calibrating, Maintaining, and Troubleshooting HART Instrumentation

Fluke 1550B 5KV Insulation Tester
Safety and cost efficiencies make the 1550B megohm meters the absolute right choice for electricians and instrument shop personnel. Save and stay safe with the 1550B

• Test Voltages of 500V, 1000V, 2500V, 5000V
• Warning Voltage Function Alerts the User that Line Voltage is Present and Gives the Voltage Reading up to 600 VAC or DC
• Leakage Current
• Ramp Function (0-5000 VDC) for Breakdown Testing
• 99 Memory Location
• Includes Quicklink 1550 Software and Optical Interface Cable for Downloading to a Windows PC

Fluke 80 Series V Industrial Multimeters

Accuracy and diagnostic functions for maximum industrial productivity. The new 80 Series V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems in electronics, plant automation, power distribution, and electro-mechanical equipment.

• Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87-5)
• True-rms AC voltage and current for accurate measurements on non linear signals (87-5)
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87-5)
• Measure up to 1000 VAC and DC
• Measure up to 10A (20A for 30 seconds)
• 10000 µF capacitance range
• Frequency to 200 kHz and % duty cycle
• Peak capture to record transients as fast as 250 µs (87-5)
• 4 1/2 digit mode (87-5)

Fluke 190 Series Portable Oscilloscope

When you need to see the waveforms and make electrical measurement, it's great for seeing trends or capturing glitches in your signal.

• Dual-Channel, 60, 100, or 200 MHz Bandwidths
• Up to 2.5 GS/s Real-Time Sampling per Input
• Connect and View™ Automatic Triggering, a full range of Manual Triggering Modes plus External Triggering
• 24 Automatic Waveform Measurements
• Cursors, Zoom, and Real-Time Clock
• 1000V Safety Certified Independently Floating Isolated Inputs
• Includes a Built-in 5000-Count True RMS Multimeter and a Trend Plot™ Paperless Recorder

Fluke 787 Process Multimeter
Save money with the 787 Process Meter:

Two instruments in one. A combination of a precision DMM and mA source all for the price of a typical loop calibrator.

• Precision 1000V, 440 mA Digital Multimeter
• 20 mA Current Source/Simulator
• 0.05% DC Current Accuracy, 1 µA Resolution to 30 mA
• True RMS AC Voltage Measurement to 1 kHz
• Diode Test and Continuity Beeper
• Manual Step (25%, Coarse, Fine) Plus Auto Step and Auto Ramp
• IEC 1010-1, CAT III 1000V.

• Rugged Fabric with Internal Frame
• Over 20 Inside and Outside Pockets and a Zippered Main Compartment
• Water Resistant
• Size (H x L x W): 13 x 20 x 9 inch (325 x 500 x 225 mm)

Fluke 707 mA Loop Calibrators

Easy Calibration Troubleshooting.
Spend your valuable time diagnosing the mA loop, not figuring, out the calibrator. The 707 and 707EX (intrinsically safe) loop calibrators provide you quick, easy calibration troubleshooting of your process loop.

• Intrinsically Safe (707EX)
  - ATEX Certification (Ex II 2 Eex la IIC T4 Zones 1 and 2)
  - FM Certification N.I. Class I Div 2 Areas Group A-D
• Simultaneous mA and % Readout
• 0.001 mA Resolution for mA Source, Simulate, and Measure
• Selectable Slow Ramp, Fast Ramp, and Step Ramp to provide smooth Outputs for Valve Slewing and Loop Functional Tests
• 24V Internal Loop Supply to Power and Read a Transmitter

• Accuracy ± 99.7 °C + 10 µV
• Sources and Reads 9 T/C Types plus mV
• Uses Mini-Plug T/C Terminations Only

• Price	$825.00
  Order Now Below

• Accuracy ± 99.98%
• 0.001 mA Resolution
• Sources and Reads 0-24 mA
• Sources and Reads 0-10 V or 0-100 mV
• Simulate 2-Wire Transmitters

• Fluke 715 mA/mV/V Process Calibrator
  Range	0-100 mV~ 0-10 V~0-24 mA
  Accuracy	± 99.98%
  Resolution	0.001 mA
  Sources/Simulates	2-Wire Transmitters
  Price	$825.00
  Order Now Below

NIST Traceable Calibration Certificates

To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for all of the Vitrek products, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited/ ISO 17025 accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest.