AEMC 5600

AEMC 6240 Digital Micro-Ohmmeters 2129.80

AEMC 6240 - Micro-Ohmmeter (2129.80) (Replaces 5600)

The 10A Micro-Ohmmeter Model 6240 is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method of testing, the Model 6240 Micro-Ohmmeter accurately measures very low resistance within 0.25%. Resistance measurements are from 1µΩ resolution to 400Ω F.S. The Model 6240 has selectable test currents of 10A, 1A, 100mA and 10mA and includes a polarity reversal function to allow compensation for thermal e.m.f. offsets The Model 6240 is designed to conduct tests on both resistive and inductive material. Up to 99 measurements can be stored and printed directly to a printer or from a PC.The DataView® Software included allows you to configure the instrument, temperature compensate the test results, as well as, store data and print reports.

AEMC 6240 Features

• Reliable low resistance measurements
• Four-terminal Kelvin resistance measurement
• 10A test current at up to 4000μΩ
• 0.25% basic accuracy
• 1 micro-ohm resolution
• Direct reading, easy to operate
• Six resistance ranges 4000μΩ thru 400Ω
• Overload and input fuse protection
• Automatic decimal point and zeroing
• Large terminals accept banana plugs and spade lugs
• Rechargeable NiMH battery with internal charger (110/220V)

• AEMC 6240 Specifications Range 4000µΩ 40mΩ 400mΩ 4000mΩ 40Ω 400Ω Accuracy 0.25% ±2cts 0.25% ±2cts 0.25% ±2cts 0.25% ±2cts 0.25% ±2cts 0.25% ±2cts Resolution 1µΩ 10µΩ 0.1mΩ 1mΩ 10mΩ 100mΩ Test Current 10A 1A 1A 100mA 10mA 10mA Memory Stores up to 99 test results Power Source Rechargeable 6V, 8.5Ah NiMH batteries Measurement Mode Single test start/stop or auto test and store of multiple measurements Power Source Rechargeable 6V, 8.5 Ah NiMH batteries Battery Life Up to 850, 10A tests Battery Charging Internal 110/230V, 50/60 Hz charger Power Management User selectable power save mode Low Battery Indication displayed when battery voltage is low Memory Stores up to 99 test results Data in memory can be reviewed on the instrument display, on a PC or via direct printout Mechanical Dimensions 10.70 x 9.76 x 7.17" (270 x 250 x 180mm) Weight 10 lbs. (4.5kg) Index of Protection IP53 (case open) IP54 (case closed) Display Display Type 4000-count LCD Size 4 x 2.25" (102 x 57mm) Backlight Blue electroluminescent Color Safety yellow case; gray faceplate UL94 V-O Interface Interface Port Optically isolated USB Environmental Operating Temperature +14° to +131°F (-10° to 55°C); 10 to 85% RH Storage Temperature -40° to +158°F (-40° to +70°C); 10 to 90% RH Safety Safety Rating EN61010-1 300V Cat. II; 50V Cat. III Double Insulation Yes CE Mark Yes Catalog No. 2129.80

• Link to Micro-Ohmmeter Lead and Probe Accessories

AEMC 6250 Micro-Ohmmeter (2129.81)

The 10A Micro-Ohmmeter Model 6250 is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method, the Model 6250 is the most accurate Micro-Ohmmeter available, with results within 0.05%.

Resistance measurements are automatically calculated, taking into account the measurement value, ambient temperature, metal type and metal temperature co-efficient. Metal temperature can be manually entered by the operator or directly measured by the Model 6250 with an optional RTD temperature probe.

The Model 6250 is uniquely designed to conduct tests on both resistive and inductive material, with operator selection directly from the front panel. Three test modes are available; resistive (instantaneous test), inductive (continuous test), and auto (repetitive test). Up to 1500 measurements can be stored and printed directly to a printer of from a PC.

AEMC 6250 Features

• Measures from 0.0001mΩ (0.1µΩ resolution) to 2500.0Ω
• Test current selection of 1mA, 10mA, 100mA, 1A and 10A
• RTD temperature probe to check tested sample (optional)
• Selectable metal types
• Automatic and manual temperature correction
• EMF levels measured and eliminated in measurement
• Two programmable alarm set points
• Stores up to 1500 test results
• Selectable Inductive and Resistance test modes
• Automatic multiple test mode (multiple tests without pressing the button)
• Large multi-line electroluminescent display
• Local or remote test setup and control
• Direct printout
• Internal rechargeable batteries - conduct up to 5000 10A tests
• Rugged, double insulated waterproof case
• CE Mark

Link to Micro-Ohmmeter Lead and Probe Accessories

AEMC 5600 Micro-Ohmmeters(Replaced by 6240)

The Micro-Ohmmeter Model 5600 performs accurate, reliable low resistance measurements with test current to 10A and resolution to 1mΩ. The Model 5600 uses a four-wire Kelvin Bridge method, which eliminates test lead resistance for a measurement accuracy of 0.25%. A reverse polarity switch compensates for the effect of DC voltage interference on the accuracy and permits reading averaging. A built-in circuit filters against AC signals.

The large, easy-to-read LCD directly displays resistance measurements in ohms with an automatic decimal point. Power is supplied by a long-life NiCD battery with a built-in recharger. The Model 5600 features an automatic shutoff after four minutes on non-use.

The Model 5600 is housed in a sealed, safety yellow field case with carrying handle and a lid that may be removed during testing.

Features
Four terminal Kelvin resistance measurement
10A test current
0.25% basic accuracy
1µΩ resolution
Direct reading, easy to operate
Six selectable ranges
Reverse polarity switch
Overload and input fuse protection
Automatic decimal point and zero
Rechargeable NiCD battery (110/220V)
Rugged field case for industrial applications

• Link to Micro-Ohmmeter Lead and Probe Accessories

• Model	Description	Data	MSRP	Price	BUY
  AEMC 5600	Portable Micro-Ohmmeter		$2695	$2560	Buy Now
  AEMC 6240	Portable Micro-Ohmmeter		$ 2695	$2595	Buy Now
  AEMC 6250	Portable Micro-Ohmmeter		$3595	$3195	Buy Now
  2118.73	Kelvin Probes 10 ft 10 Amp			$99	Buy Now
  2118.74	Kelvin Probes 20 ft 10 Amp			$149	Buy Now

• Please e-mail ATEquip.com for Product Availabililty or a Price and Delivery Quotation. Thank you.

• 
  

NIST Traceable Calibration Certificates

To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for all of the Vitrek products, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited/ ISO 17025 accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest.

AEMC 6240 Digital Micro-Ohmmeters 2129.80