
Fiber OWL 4 Bolt Fiber Optical Power Meter

OWL Optical Fiber Test Kit

OWL Dual OWL 2 850nm Optical Fiber Light Sources
|
Fiber OWL 4 BOLT FO4B & FO4BC Optical Fiber Power Meters
The Fiber OWL 4 BOLT is a high accuracy, high resolution,
microprocessor controlled optical power meter. It has a 75dB
dynamic range making it ideal for both singlemode and multimode
fiber testing,
Its integrated light source makes performing optical length
measurements easy. The light source connector port is ST only.
It has an attractive handheld case made from high impact plastic, a
large, backlit, graphic, liquid crystal display, and 18-key keypad for
easy data entry. The fixed universal fiber adapter accepts ST, SC,
and FC connectors equally well without the need for extra adapter
caps. It will operate for up to 100 hours on a standard 9-volt battery
and has built-in auto shutdown.
The Fiber OWL 4 BOLT includes a built-in loss wizard that helps you
easily calculate the allowable loss for the fiber runs that you will be
measuring. The meter stores physical fiber information for up to eight
links. Link information includes: link name, date, fiber type, fiber
length, connectors, splices, temperature, and calculated or user -
defined reference power values. In addition the meter will store up to
1000 measured data points with labels. Each value includes the fiber
type and link.
The stored information can be selectively viewed, edited (measured
again), printed, or deleted. The meter will print formatted reports of
selected stored data directly using the built-in USB port, or all of the
stored data can be downloaded to a computer spreadsheet or our
free OWL Reporter software to produce formatted certification
reports.
Supported Cabling Standards:
EIA/TIA 568 ISO/IEC 11801 1000Base-SX / LX
100Base-FX 10Base-FB / FL FDDI
ATM-155 / 622 Fibre Channel Token Ring
Also supports 2 user-defined standards
Supported Cabling Standards:
EIA/TIA 568-B, ISO/IEC 11801, 10-Gigabit Ethernet,
1000Base-SX, 1000Base-LX, 100Base-FX,
10Base-FB, 10Base-FL FDDI,
ATM-155, ATM-622, Fibre Channel,
Token Ring
Integrated optical length tester port is typically ST. For connecting the ST port to different connector types, simply use an adapter patch cable (for example, ST or SC). (Patch Cords not included)
The Fiber OWL 4 Bolt FO4B & FO4BC are InGaAs photodetector designs with universal 2.5mm adapter port
(for ST, SC, FC, and others) and a 1.25mm adapter port
(for LC, MU, and other SFF connectors). Its
integrated light source for optical fiber power measurement of fiber optic
links at 1310nm is fitted for ST connectors only. The Fiber Owl 4 Bolt is both
Multimode (MM) and Singlemode (SM) ready.
OWL FO4B & OWL FO4BC Key Specifications 
Power Meter 
FO4B ~Dynamic Range +5 to -70 dBm
FO4BC-Dynamic Range +25 to -50 dBm
Absolute accuracy : 0.15dB over range of 0 to -45 dBm
NIST traceable calibrated wavelengths 850nm, 1300nm, 1310nm,1550nm
Additional Wavelengths 980nm, 1490nm, 1625nm
Resolution 0.01dB
Precision 1 0.10dB
Dimensions 6.48 x 3.48 x 1.1 in
Light Source 
Launch Method: Laser
Connector Type: ST
Center Wavelength: 1310 nm
Conforms to the Harmonized European Standards EN 61326-1 and EN 61010-1.
Please note: Patch Cords are not included in purchase of Kits. Purchase includes: Fiber OWL 4 Bolt Power Meter | Specified Light Source | OWL Reporter Software | Manual | Down Load Cable | Batteries | NISTCert | Carrying Case | Carrying Straps | Protective Rubber boots
Link to Pricing and Ordering Information |