• OWL WaveSource WS-MDVst & WS-MDVsc Optical Fiber Light Sources 850.1300nm WaveSource series fiber optic light sources offer the fiber optic professional a wide range of options for their testing needs.  Many different combinations are available: multimode MM only, singlemode SM only, or both multimode MM and singlemode SM.  Our quad-wavelength version (WS-MDSD) has all four wavelengths (850, 1300, 1310, 1550) in one unit!  Visual Fault Locators (VFL) can also be added to multimode MM only and singlemode SM only versions.  VFLs can be used in both multimode MM and singlemode SM optical fibers. OWL's WS-MDVst and WS-MDVsc provides850/1300nm test wavelengths. All versions of the WaveSource have two transmission modes: Continuous Wave (CW) for accurate temperature-stabilized fiber optic tests; and modulated mode.  Modulated mode provides for an auto-testing function when used with the Fiber OWL 4 or WaveTester optical power meter series.  The modulated signal from the WaveSource causes the WaveTester to switch to the currently selected wavelength, which eliminates much of the guesswork during tests, and saves valuable time. WaveSource light sources come configured with your choice of SC, ST, or FC connector ports. Automatic Wavelength Detection when used with the OWL waveTester and Fiber OWL Optical Fiber Power Meters. Visual Fault Locator (VFL) Light @ 650nm Visual Fault Locator (VFL) is used to quickly troubleshoot faults in the continuity of both single mode and multi-mode fibers, especially at fiber launch points or in OTDR dead zones.  A high intensity visible red laser beam, 650nm, is precision-coupled into a optical fiber; breaks and micro-bends in the fiber deflect the red light into the fiber jacket, producing a red glow at the point of the fault.

• OWL WaveSource WS-MDVst & WS-MDVsc (850/1300nm) Optical Fiber Light Sources Features Output Power: -10 dBm (singlemode sources) Output Power: -20 dBm (multimode sources) CW or modulated output Accuracy: ± 0.1dB @ 25C Models can include different combinations of singlemode, multimode Photodiode Compensated Extended Battery Life Available with SC, ST, or FC fiber connectors Low Battery Indicator NIST Traceable  Product manuals come in PDF format on CD. Adobe Acrobat ReaderTM is required to view these documents. OWL WS-MDVxx Key Specifications OWL WaveSource WS-MDVst & WS-MDVsc (850/1300nm) Optical Fiber Light Sources Features Output Power: -10 dBm (singlemode sources) Output Power: -20 dBm (multimode sources) CW or modulated output Models can include different combinations of singlemode, multimode Center Wavelength: [850nm~+30-10nm LED] [1330nm~±50nm LED] Spectral Width: [50nm@850nm LED] [180nm@1300nm LED] Operating Temperature: -20 to +70C Visual Fault Locator VFL 650nm

• Link to Ordering information

  All KITS include in addition to the Meters & Sources: Hard Carrying Case, Batteries, NIST Traceable Certification., Manuals, Protective Rubber Boots

• 	Please e-mail ATEquip.com for Product Availability or a Price and Delivery Quotation. Thank you.

NIST Traceable Calibration Certificates

To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for all of the OWL products, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest. [Back to Top]

Optical Wavelength Laboratories Optical Fiber Light Sources OWL WaveSource WS-MDVst & WS-MDVst 850/1300nm +VFL 650nm