 GW Instek GSP Series Spectrum Analyzers |
Spectrum Analyzers Model GSP-810 and Options |
Instek Model |
Description |
Data Sheet |
Manual |
MSRP |
| |
INSTEK GSP-810 Spectrum Analyzer & Options |
|
|
Check Ordering Information for Discount Prices |
GSP-810 |
Instek Spectrum Analyzer - 150KHz-1GHz |
|
|
$2375.00 |
| GSP-810 Software |
Remote Control Software for GSP-810 |
|
|
$210.00 |
| GSP-810PM |
Spectrum Analyzer - with Power Meter |
|
|
$2945.00 |
| GSP-810TG |
Spectrum Analyzer - with Tracking Generator |
|
|
$3275.00 |
| GSP-810TGPM |
Spectrum Analyzer - with Tracking Generator & Power Meter |
|
|
$3560.00 |
| GSP-810 |
Free Soft Ware Down Load |
|
|
| |
|
|
|
Check Ordering Information for Discount Prices |
| |
GW Instek Spectrum Analyzers Model GSP-827 and Options |
|
|
|
| GSP-827 |
Spectrum Analyzer - 150KHz-2.7 GHz |
|
|
$4700.00 |
| GSP-827 |
Free Soft Ware Down Load |
|
|
| GSP-827-Opt01 |
Tracking Generator, factory installed |
|
|
$1500.00 |
| GSP-827-Opt02 |
Battery Pack, factory installed |
|
|
$700.00 |
| GSP-827-Opt03 |
+/- 1ppm stability, factory installed |
|
|
$315.00 |
| GSP-827-Opt06 |
GPIB interface, factory installed |
|
|
$300.00 |
| GSP-827-Opt07 |
Carrying Case |
|
|
$210.00 |
| GSP-827-Opt08 |
General Kit set |
|
|
$295.00 |
| GSP-827-Opt09 |
CATV Kit set |
|
|
$360.00 |
| GSP-827-Opt10 |
RLB Kit set |
|
|
$240.00 |
| GSP-827-Opt11 |
DC Car Cord - Only works with Battery Pack (GSP-827-Opt02) |
|
|
$40.00 |
| GSP-827-Opt12 |
EMI Filters, factory installed |
|
|
$1000.00 |
| GSP-827-Opt13 |
Demodulator, factory installed |
|
|
$1000.00 |
| GSP-827-Opt14 |
EMI filters and 300Hz RBW, factory installed |
|
|
$2000.00 |
| GSP-827-Opt15 |
EMI filters and Demodulator, factory installed |
|
|
$1200.00 |
| GSP-827-Opt16 |
EMI filters, 300Hz RBW, Demodulator, factory installed |
|
|
$2200.00 |
| |
|
|
|
|
| GSP-830 |
9KHz-3 GHz Spectrum Analyzer |
|
|
$5990.00 |
| GSP-830 TP |
9KHz-3 GHz Spectrum Analyzer with Tracking Generator |
|
|
$7790.00 |
| GSP-830 Opt. 02 |
Battery Pack - 2 each |
|
|
$400.00 |
| GSP-830 Opt. 03 |
+/- 1ppm stability |
|
|
$330.00 |
| GSP-830 Opt. 04 |
300Hz RBW |
|
|
$1150.00 |
| GSP-830 Opt. 05 |
9KHz & 120KHz RBW |
|
|
$1150.00 |
| GSP-830 Opt. 06 |
10KHz & 100KHz RBW |
|
|
$1150.00 |
| GSP-830 Opt. 07 |
AM/FM Demodulator & 10KHz, 100KHz RBW |
|
|
$2300.00 |
| GSP-830 Opt. 08 |
GPIB Interface |
|
|
$330.00 |
| |
Spectrum Analyzer GSP- 830 Options |
|
|
|
| GRA-404 |
Rack Panel adapter |
|
|
$250.00 |
| GSC-001 |
Soft Carrying Case |
|
|
$200.00 |
| GTL-301 |
RF Cable |
|
|
$65.00 |
| GTL-302 |
RF Cable |
|
|
$40.00 |
| GTL-303 |
RF Cable |
|
|
$40.00 |
| GTL-304 |
RF Cable |
|
|
$40.00 |
| GTL-401 |
DC Power Cord |
|
|
$40.00 |
| RLB-001 |
Return Loss Bridge |
|
|
$360.00 |
| |
Spectrum Analyzers Accessories |
|
|
Check Ordering Information for Discount Prices |
| ATA-001 |
BNC Antenna |
|
|
$20.00 |
| GAP-801 |
Preamplifier |
|
|
$600.00 |
| GKT-001 |
General Kit Set |
|
|
$295.00 |
| GKT-002 |
CATV Kit Set |
|
|
$360.00 |
| GKT-003 |
RLB Kit Set |
|
|
$240.00 |
| GKT-006 |
EMI Probe Kit Set |
|
|
$1580.00 |
| GRA-404 |
Rack Panel adapter |
|
|
$250.00 |
| GSC-001 |
Soft Carrying Case |
|
|
$200.00 |
| GTL-301 |
RF Cable |
|
|
$65.00 |
| GTL-302 |
RF Cable |
|
|
$40.00 |
| GTL-303 |
RF Cable |
|
|
$40.00 |
| GTL-304 |
RF Cable |
|
|
$40.00 |
| GTL-401 |
DC Power Cord |
|
|
$40.00 |
| RLB-001 |
Return Loss Bridge |
|
|
$360.00 |
|
|
Please E-mail ATEquip.com for Product Availability or a Price and Delivery Quotation. Thank you.
|
|
To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for all of the GW INSTEK products, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited/ ISO 17025 accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest.
|
GW Instek GSP-810
(150kHz ~ 1000MHz)
MSRP $2375
|
|
GW Instek Spectrum Analyzers Model GSP-827 and Options |
Accessories |
| GCS-001 |
Soft Carrying Case |
|
|
$200.00 |
|
| GKT-001 |
General Kit Set |
|
|
$295.00 |
|
| GKT-002 |
CATV Kit Set |
|
|
$360.00 |
|
| GKT-003 |
RLB Kit Set |
|
|
$240.00 |
|
| GTL-401 |
DC Power Cord/Jack |
|
|
$40.00 |
|
GW Instek GSP-827(9kHz ~ 2.7GHz)MSRP $4700
|
|
Superior Performance: |
 Frequency Range: 9kHz~2.7GHz. |
- Input Range: -100dBm~+20dBm
|
- Average Noise Floor: -130dBm/Hz
|
- Power Measurements: ACPR/OCBW/CH Power
|
- Split Window: Simultaneous Measurements in Two Separate Frequency Spans.
|
- RBW: 3KHz, 30KHz, 300KHz, 4MHz
- 300Hz RBW, EMI Filters, AM/FM Demodulation options available
|
Light Weight Portable |
- Light Weight at 4.5kg and Compact Size
|
- AC/DC/Battery Operation
|
- 100 Trace/State Memories with Date/Time stamp and file name
|
Easy-To-Use |
- 10 Markers: Delta Mode, Peak Search, Peak Track
Trace Function: Dual-Trace Display, Peak Hold, Freeze, Average, Trace Math
|
- Limit Line: Upper/Lower Limit with Pass/Fail Test
|
- Trigger Function: Video/ External
|
- Clock/Calendar: Time/Date Stamp in Saved Data
|
- Wide Range of External Reference Clock: 1MHz...19.2MHz
|
|
|
|
Announcing Instek's all new 3GHz Spectrum Analyzer Model GSP-830
|
|
|
|
GW Instek Instek Spectrum Analyzer GSP 830 with Pre-amp |
The newly announced Instek 3GHz Spectrum Analyzer, GSP-830, inherits advantages of high performance, low cost, easy to use and varied portability. With GW Instek state-of-the-art design, GSP-830's
outstanding noise floor level, -152dBm/Hz and -162dBm/Hz with GAP-801 preamplifier, presents ultra-sensitivity for picking up extremely weak signals.
Through the Auto Sequence mode, professionals can define
their own macros in 10 Sequence sets while additional 'Pause', 'Repeat' or 'Single' run mode can be selected for different applications. Additional advanced features, as Auto Set, Split window, Power
Measurements, Pass/Fail, all make GSP-830 an ideal solution when it comes to spectrum analysis.
The broad choices of advanced interfaces such as USB host/device, RS-232C, VGA, and GPIB (optional), make print-out, remote control and monitoring, as well as data transactions possible. |
|
Sequence~Front panel operations can be automated with built-in Sequence programming functions |
Auto-Set~ Signal is automatically measured and located at the display center with default or specified settings. |
|
|
GW Instek GSP-830 SPECIFICATIONS |
Frequency Range |
Aging Rate |
9kHz ~ 3GHz |
Span Range |
10ppm, 0-50 C, 5ppm/yr |
Phase Noise |
2kHz ~ 3GHz in 1-2-5 sequence, full span, zero span |
Sweep Time Range |
-80dBc/Hz @1GHz 20kHz offset typical |
Resolution Bandwidth |
RBW Range |
3kHz, 30kHz, 300kHz, 4MHz |
RBW Accuracy |
15% |
Video Bandwidth Range |
10Hz ~ 1MHz in 1-3 steps |
Amplitude |
Measurement Range |
-103dBm ~ +20dBm, 1MHz ~ 5MHz
-117 -1dBm~+20dBm, 600MHz~2.3GHz, Ref. Level @-50dBm
-120 1dBm~+20dBm, 5MHz ~600MHz, Ref. Level @-50dBm
-115 1dBm~+20dBm, 2.3GHz ~ 3GHz |
Overload Protection |
+30dBm, 25VDC -110dBm ~ +20dBm |
Reference Level Range |
1dB @100MHz |
Accuracy |
1dB |
Frequency Flatness |
1dB over 70dB |
Display Range Linearity |
+30dBm, 25VDC -110dBm ~ +20dBm |
Dynamic Range |
Average Noise Floor |
-135dBm/Hz, 1MHz ~ 15MHz, Ref. Level _ -30dBm
-152 1dBm/Hz, 15MHz ~ 600MHz, Ref. Level @-50dBm
-149 1dBm/Hz, 600MHz ~ 2.3GHz, Ref. Level @-50dBm
-147 1dBm/Hz, 2.3GHz ~ 3GHz |
Third Inter-Modulation |
<-70dBc @-40dBm Input, Ref. Level @-30dBm |
Harmonic Distortion |
<-60dBc RF Input < -40dBm, Ref. Level @-30dBm |
Non-Harmonic Spurious |
<-110dBm @3kHz RBW |
General |
Display |
640 x 480 high resolution color TFT LCD |
Internal Memory |
10 traces or Setup info, 10 Limit lines, 5 Corrections, 10 Sequences |
Markers |
10 Markers for peaks; 5 normal-delta marker pairs Functions: Delta , Peak , Marker Track |
Trace Detection |
3 traces with Peak, Maximum hold, Freeze, Trace math |
Power Measurement |
ACPR, OCBW, Channel power, N dB BW and Phase Jitter |
Autoset Function |
Auto tuning the measurement result for observation |
Connectors |
RF-Input |
Type: N female, 50 nominal
RF input VSWR: <2:1@ 0dBm Reference Level |
External Reference |
Type: BNC female, |
Clock Input |
1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHz |
Reference Clock Output |
Type: BNC female, 10MHz |
External Trigger Input |
Type: BNC female, accept +5-V TTL signal |
DC Input |
Jack: 5.5mm, 12V |
DC Voltage Output Jack |
Type: SMB male, outputs +9V/100mA Max. |
Interfaces |
RS-232C |
Sub-D 9 pins female |
USB |
USB Host/Device 2.0 full speed supported |
VGA Output
Option: GPIB Interface |
Fully programmable with IEEE 488.2 compliance |
General Miscellaneous |
Power Source |
AC 100 ~ 240V, 50/60Hz |
Accessories |
User manual x1 , Power cord x1 |
Dimensions |
330(W) x 170(H) x 340(D) mm |
Weight |
Approx. 6kg |
OPTIONS |
Opt. 01 Tracking Generator |
Frequency Range |
9kHz ~ 3GHz |
Amplitude Range |
-50dBm ~ 0dBm |
Amplitude Accuracy |
1dB@100MHz, 0dBm |
Amplitude Flatness |
1dB@0dBm |
Harmonics |
<-30dBc typical |
Reverse Power |
+30dBm |
Impedance |
Type: N female, 50 nominal |
RF Output VSWR |
< 2 : 1 |
Options 02~08 |
Opt. 02~ Battery Pack |
10.8V Li-Ion battery pack x 2 |
Opt. 03~ 1ppm Stability |
1ppm , 0 ~ 50 °C, 1ppm/yr |
Opt. 04~ 300Hz RBW |
RBW 300Hz, 3dB bandwidth
RBW accuracy : 15% |
Opt. 05~ 9kHz & 120kHz RBW(*) |
RBW selections : 9kHz and 120kHz, 6dB bandwidth
RBW accuracy : 15% |
Opt. 06*~10kHz & 100kHz RBW(*) |
RBW selections : 10kHz and 100kHz, 3dB bandwidth
RBW accuracy : 15% |
Opt. 07*~ AM/FM Demodulator & 10kHz & 100kHz RBW(*) |
Demodulation : AM , FM
Output : internal speaker, 3.5mm stereo jack wired for mono operation
RBW selections : 10kHz and 100kHz, 3dB bandwidth
RBW accuracy : 15% |
Opt. 08*~GPIB Interface |
IEEE 488 bus |
Note 1. NOTE: 1. (*) Only one option can be selected between Opt. 05,06,07. |
Note 2. All options are factory-installed except opt.02. |
OPTIONAL ACCESSORIES |
ATA-001 BNC Antenna |
(See Photo in Accessories) |
ATA-002 Near Field Probe |
Wideband, 0.1~1000 Mhz, Low Noise, 2.9dB Typical |
Gap-801 Preamplifier |
Preamplifier with 10dB(typical) 9kHz ~ 6GHz |
GKT-001 General Kit set |
ADP-002:
|
adaptor, SMA(J/F) ~ N(P/M) x 2 |
ATN-100: |
10dB attenuator, N(J/F) ~ N(P/M) x 1 |
GTL-303: |
RF cable assembly(SMA(P/M),RD316,600mm)x2 |
GSC-002: |
Kit box x 1 |
GKT-002 CATV Kit set |
ADP-001: |
adaptor, BNC(J/F) ~ N(P/M) x 2 |
ADP-101: |
Adaptor, BNC(J/F)75 ~BNC(P/M)50 x 2 |
GTL-304: |
RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2 |
GSC-003: |
Kit box x 1 |
GKT-003 RLB Kit set |
GAK-001:
|
termination 50 , N(P/M) x 1 |
GAK-002: |
Cap with chain, N(P/M) x 1 |
GTL-302: |
RF cable assembly(RG223,N(P/M),300mm)x2 |
GSC-004: |
Kit box x 1 |
GKT-006 EMI Probe Kit set |
ANT-01:
|
6cm Loop, H-Field Probe x 1 |
ANT-02: |
3cm Loop, H-Field Probe x 1 |
ANT-03: |
6mm Stub tip, E- Field Probe x 1 |
PR-03: |
Touch Passive Probe x 1 |
Test Lead: |
BNC(P/M)~BNC(P/M) RF Cable x 1 |
Test Lead: |
SMA(P/M)~SMA(P/M) RF Cable x 1 |
ADP-001: |
N(P/M)~BNC(J/F) Adapter x 1 |
ADP-002: |
N(P/M)~SMA(J/F) Adapter x 1 |
GRA-404 Rack Adapter Panel |
Rack Mounting (19", 4U) |
CSC-001 Soft Carrying Case |
(See Photo) |
GTL-301 RF Cable |
RG 223 N(P/M), 1000mm |
GTL-401 DC Power Cord |
DC power cord with DC Jack and lighter plug: ~current 5A |
 |
|
GRA-004 Rack Adapter |
GTL-401 DC Power Cord |
 |
 |
GSP-830 Rear Panel |
GSC-001 Soft Carrying Case
|
 |
 |
GKT-006 EMI Probe Kit Set |
GKT-001 General Kit set |
|
|
GKT-002 CATV Kit set |
GKT-003 RLB Kit set |
|
|
|
|
