Instek GOM-801H 1999 Count Milli-Ohmmeter
The Instek GOM-801H Milli-ohm meter is the ideal device for quick and precise component and material
resistance measurements. The main display is equipped with a 3 1/2 digit 0.5" red LED with
comparator indicators. Measurable objects can cover cable joints, earth bonds, switches, motors,
transformers and generators. The front panel features seven selectable test ranges, 19.99mΩ to 20kΩ with 10uΩ resolutoion ofn the 20mΩ range.
The internal comparator is fully adjustable for the user settable Hi/Lo comparison indicator with PASS/FAIL intelligence.
Instek's GOM-801H is the best choice for an inexpensive, easy to use, yet reliable milliohm meter The GOM-801H is supplied with the GTL-108A 4-Wire lead resistance compensating Set. DATASHEET
Instek GOM-801H Milli-Ohmmeter Features |
Instek GOM-801H Milli-Ohmmeter Features |
 1999 Counts Display
|
1999 Counts Display |
20, 200mΩ, 2, 20, 200Ω, 2k, 20kΩ Ranges(7) |
20, 200mΩ, 2, 20, 200Ω, 2k, 20kΩ Ranges(7) |
0.01Ω, 0.1Ω, 1Ω, 10Ω, 100mΩ, 1Ω, 10Ω |
0.01Ω, 0.1Ω, 1Ω, 10Ω, 100mΩ, 1Ω, 10Ω |
0.2% Best Accuracy |
20mΩ Range : ± (0.2% rdg + 6 digits) |
Hi-Lo Limit Comparitor (Go-No/Go Settable) |
All Other Ranges: ± (0.2% rdg + 4 digits) |
Four-Terminal Measurement Technique |
Setting Accuracy: ± (0.2% + 6 digits) |
Go/No-Go Indicator |
AC Power: 100V/120V/220V/230V±10% , 50/60Hz |
|
Option KCS Gold Plated 4-Wire Kelvin Clip Set
Nylon Bobbin Insulates the set of Clips from each other
|
Option "K" Medium Weight Gold-Plated Kelvin Clip Set:
Useful for custom 4-wire measurements on components, transformer wires, fixtures and a variety of loads. The gold plated "KCS" clips open to 1/2" and accommodate up to 10 amps of test current.
|
Option KCS Gold Plated 4-Wire Kelvin Clip Set-Kit
Nylon Bobbin Insulates the set of Clips from each other |
Opt. "KK" 4 Wire Kelvin Lead Set:
6 feet shielded cable set dual banana type terminated in "JAWS". (Opens 2" )
|
"MP-4"/"MP-5" Kelvin Surface Probe Set
Engineered to support a variety of surface, plating, and bonding resistance measurement requirements. These probes provide repeatable resistance or bond testing on metallic screens, conductive layers, flat or plated surfaces etc. Test current is evenly distributed through the probe base while potential sensing is accomplished via a spring loaded center contact. For consistent results with smaller target areas the "MP-5" offers a reduced surface diameter of 0.5", while "MP-4" is a 1" diameter. |
Opt. MP-5 Kelvin Surface Probe Set
Engineered to support a variety of surfaces, plating, and bonding resistance measurement requirements. These probes repeatable resistance or bond testing on metallic screens, conductive layers, flat or plated surfaces etc. Test current is evenly distributed through the probe base while potential sensing is accomplished via a spring-loaded center contact. Surface diameter is 0.5" while "MP-4" is a 1" diameter..
|
MP-3" Micro-probe
48" shielded cables (dual banana), handheld pencil type, terminated in spring-loaded steel tips with .08" separation (1 Amp max). |
"MP-2" Kelvin Mini-Probe Set
48" shielded cables, handheld pencil type, terminated in spring loaded steel tips with 0.18" separation. (1 Amp max |
|
GOM-801H 
