Instek AFG-3051 (50MHz) & AFG-3081 (80MHz) Abritrary Waveform Generators

Instek's AFG-3051 & AFG-3081are arbitrary waveform generators designed for industrial, scientific research and educational applications. The two Arbitraryform Generators offer bandwidths of 80MHz (AFG-3081) and 50MHz (AFG-3051) with built-in multiple standard waveforms to meet users' diversified needs. The AFG-3051 & AFC-3081 also provides a high 16 bit resolution, 200MSa/s sample rate and a 1M memory depth for editing arbitrary waveforms directly through the intuitive user interface. The Direct Waveform Reconstruction (DWR) function enables users to directly import waveforms from a GDS-2000 Series oscilloscope to the AFG-3051 and/or AFG-3081 via USB host, allowing users to edit waveforms and enhance measurement efficiency. In addition, the AFG-3051 & AFG-3081 have switchable 50 Ohm and Hi-Z Impedances, built-in On-Screen Help for operation conveniently. Complete parameter settings and waveform can be displayed through 4.3-inch high-resolution TFT LCD. Through USB, RS-232, and GPIB, user can use dedicated PC software or IEEE488.2 commands to edit waveforms.

Instek AFG-3051 & AFG-3081 Arbitrary Waveform Generators Features:

Wide frequency range from 1uHz to 50/80MHz
High 200MSa/s sampling rate
16-bit Amplitude Resolution
Output from any section of 1M-point-long waveforms
4.3" high resolution LCD display
Four ways to generate arbitrary waveforms from Front Panel Operation CSV file uploading, Direct Waveform
CSV file uploading, Direct Waveform Reconstruction (DWR), Arbitrary Waveform Editing PC Software
Standard Support Interfaces： RS232/GPIB/USB Host & Device
Impedance switch / on-screen help

Instek AFG-3051 & AFG 3081 Offers WIDE FREQUENCY RANGE from 1uHZ to 80/50MHz

The AFG-3051 &AFC-3081 Arbitrary Waveform/ Function Generators employ direct digital synthesis (DDS) technology to generate and output a variety of stable and precise waveforms. The frequency operates at up to 80MHz (AFG-3081) or 50MHz (AFG-3051), with a minimum resolution of 1uHz for the entire frequency range. The built-in standard waveforms include sine, square, triangle, ramp, pulse, noise and other types of waveforms.

MODULATION, SWEEP and BURST FUNCTIONS are offered by Instek's AFG-3051 & AFG-3081

The Modulation Functions, including AM, FM, FSK and PWM, are provided to cover a broad range of market requirements. A dedicated terminal for the modulating signal output is available in the front panel for modulation monitoring or other control purposes. Either an internal signal or an external signal can be selected to perform the modulation.
FSK is a frequency modulation scheme in which digital information is transmitted through signal frequency variation. The BFSK (binary FSK) modulation, using two frequencies to represent data 1 and 0 respectively, is commonly applied for Call ID and Remote Metering applications.
PWM is a digital modulation scheme that can be used to adjust the output power level by controlling the pulse width of the driving signal. The examples include the speed control of motor rotation and the luminance control of LED lighting instrument. With the pulse width variation of driving signal, the rotating speed of motor and the luminance of LED will change accordingly.

The Sweep Function supports three trigger modes of INT, EXT and manual, and two sweep modes of LOG and LIN. Each time a sweep signal is perceived, the function generator will start to sweep through the user-defined frequency range by the frequency variation of either Log curve or Linear curve.

The Burst Function supports two modes of Gate and N Cycle. To run burst function, the burst repetitive rate has to be set first, then the time duration of each burst has to be defined under Gate mode, or the number of the waveform cycles in each burst has to be set under N Cycle mode. Under both Gate mode and N Cycle mode, the burst waveform polarity and phase can be controlled.

AFG-3051 & AFG-3081 Feature STANDARD COMMUNICATION INTERFACES

The AFG-3051 & AFG-3081provides GPIB, RS-232, and USB as standard communication interfaces. AFG-3000 supports IEEE 488.2 protocol and command for users to integrate system or remotely control the instrument.