:"INSTEK PSM-6003 PSM-3004 PSM-2010 PROGRAMMABLE DUAL-RANGE DC POWER SUPPLIES PSM-6003 PSM-3004 PSM-2010"

Link to Instek Master DC Power Supply listing CLICK HERE

INSTEK PSM-6003 PSM-3004 PSM-2010 PROGRAMMABLE DC POWER SUPPLIES

INSTEK PSM-6003 PSM-3004 PSM-2010 PROGRAMMABLE DUAL-RANGE DC POWER SUPPLIES

The PSM Series is single output / dual range, 120 or 200W, programmable linear DC power supply.OVP, OCP, OTP, and output On/Off control protect PSM and loads from unexpected conditions. High resolution, high regulation, low ripple are maintained at 1mV/1mA, 0.01%, and less than 350 Vrms, respectively. VFD panel with simultaneous view of output and parameter setting provide comfortable operation. Configuration is simplified with output limit store/recall function and Auto step running
feature for continuous testing. Self-test and software calibration features reduce maintenance overhead. SCPI command set and Labview driver access through RS-232C or GPIB interface provide remote control and ATE software development capability. The PSM Series is an ideal choice for high precision, high reliability application such as QA verification and R&D.

DC Power Supply – Instek PSM-6003 PSM-3004 PSM-2010 Programmable Linear D.C. Power 0-30V/6A and/or 0-60V/3.3A

FEATURES Instek PSM-6003 Programmable DC Power Supply RS-232C + GPIB IEEE-488.2

· High Resolution: 1mV/1mA

· Requlation:0.01% Load/Line

· Auto Step Running with timer Setting and 100 Sets Memory

· Safety Design: OVP,OCP & OTP; Output ON/OFF Control

· Self-Test and Software Calibration

· High Visibility Vacuum-Fluorescent Display

· Front and Rear Output Terminal

· Standard Interface : RS-232C, GPIB

SPECIFICATIONS Instek PSM-6003 Programmable Linear D.C. Power 0-30V/6A and/or 0-60V/3.3A
DC OUTPUT
Low Range	0~30V/6A
High Range	0~60V/3.3A
CONSTANT VOLTAGE OPERATION
Regulation + (% of output + offset)	Load regulation < 0.01% + 2mV Line regulation < 0.01% + 2mV
Ripple & Noise	<50V : < 500μVrms/3mVpp >50V : < 1mVrms/3mVpp
CONSTANT CURRENT OPERATION
Regulation + (% of output + offset)	Load regulation < 0.01% + 250μA Line regulation < 0.01% + 250μA
Ripple & Noise	< 2mArms
RESOLUTION
Programming Voltage	2mV
Programming Current	0.5mA
Read-back Voltage	1mV
Read-back Current	0.5mA
Front Panel Voltage	1mV
Front Panel Current	1mA ( <10A ), 10mA (>10A )
OVP/OCP Voltage	10mV
OVP/OCP Current	10mA
ACCURACY
Programming Voltage	0.05% + 10mV
Programming Current	0.2% + 10mA
Read-back Voltage	0.05% + 5mV
Read-back Current	0.15% + 5mA
OVP/OCP Voltage	0.1% + 10mV
OVP/OCP Current	0.4% + 10mA
TRANSIENT RESPONSE
	< 50μsec (for output to recover within 15mV following a change in output current from full load to half load)
COMMAND PROCESSING TIME
	100ms
VOLTAGE PROGRAMMING RESPONSE TIME (for resistive load)
Voltage Up Full Load	80mS
Voltage Up No Load	100mS
Voltage Down Full Load	30mS
Voltage Down No Load	450mS
STABILITY (% of output + offset)
Voltage	0.02% + 1mV
Current	0.1% + 1mA
MEMORY
	Store/Recall 100 sets
TEMPERATURE COEFFICIENT PER±(% of output + offset)
Voltage	0.01% + 3mV
Current	0.02% + 3mA
INTERFACE
	Standard : RS-232C, GPIB
POWER SOURCE
	AC100V/120V/220V±10%, 230V-6%/+10%, 50/60Hz
ACCESSORIES
	User manual x 1 Power cord x 1 Test lead GTL-104 (4A ~10A) x 1 [or European Test Lead GTL-204 x 1] Ground Lead GTL-201A x 1 (European Terminal) Sense Lead GTL-202 x 1 (European Terminal)
DIMENSIONS & WEIGHT
	230(W) x 140(H) x 380(D)mm Approx. 10kg