• 6000 Count Display
• Auto Hold and Manual Hold
• IEC 1010 Rating: CAT IV 600V/CAT III 1000V

• Order Now Below

Calibrate Any Pressure Device
Complete your calibration package with one or more of these pressure modules. 29 versions available, call for more ranges.

Link to Fluke 700P Series Pressure Modules for complete listing of models, specifications, and pricing.

• Fluke 740 Documenting Process Calibrators
• The 740 family saves you great time if documentation is critical in your process. With the versatility of the 740 series of calibrators, you can minimize the need for additional calibrators in your plant.
  • Simultaneous Input and Output
  • Interchangeable Pressure Modules
  • Eleven T/C Curves and Eight RTD Curves (plus ohms)
  • DC input: mA, V, mV, or Frequency. For Pressure, Choose One of the 29 Interchangeable Modules from 1.0 inch water to 10000 PSI
  • Model 744 adds HART Communication capability for Calibrating, Maintaining, and Troubleshooting HART Instrumentation

Fluke 787 Process Multimeter-Loop Calibrator
Save money with the 787 Process Meter:

Two instruments in one. A combination of a precision DMM and mA source all for the price of a typical loop calibrator.

• Precision 1000V, 440 mA Digital Multimeter
• 20 mA Current Source/Simulator
• 0.05% DC Current Accuracy, 1 µA Resolution to 30 mA
• True RMS AC Voltage Measurement to 1 kHz
• Diode Test and Continuity Beeper
• Manual Step (25%, Coarse, Fine) Plus Auto Step and Auto Ramp
• IEC 1010-1, CAT III 1000V.

Fluke 707 mA Loop Calibrators

Easy Calibration Troubleshooting.
Spend your valuable time diagnosing the mA loop, not figuring, out the calibrator. The 707 and 707EX (intrinsically safe) loop calibrators provide you quick, easy calibration troubleshooting of your process loop.

• Intrinsically Safe (707EX)
  - ATEX Certification (Ex II 2 Eex la IIC T4 Zones 1 and 2)
  - FM Certification N.I. Class I Div 2 Areas Group A-D
• Simultaneous mA and % Readout
• 0.001 mA Resolution for mA Source, Simulate, and Measure
• Selectable Slow Ramp, Fast Ramp, and Step Ramp to provide smooth Outputs for Valve Slewing and Loop Functional Tests
• 24V Internal Loop Supply to Power and Read a Transmitter

• Accuracy ± 99.7 °C + 10 µV
• Sources and Reads 9 T/C Types plus mV
• Uses Mini-Plug T/C Terminations Only

• Price	$825.00
  Order Now Below

• Accuracy ± 99.98%
• 0.001 mA Resolution
• Sources and Reads 0-24 mA
• Sources and Reads 0-10 V or 0-100 mV
• Simulate 2-Wire Transmitters

• Fluke 715 mA/mV/V Process Calibrator
  Range	0-100 mV~ 0-10 V~0-24 mA
  Accuracy	± 99.98%
  Resolution	0.001 mA
  Sources/Simulates	2-Wire Transmitters
  Price	$825.00
  Order Now Below

• 24V Loop Power Supply
• HART Mode Setting with Loop Power adds 250 Ohm Resistor
• 0-100% mA Span Check Buttons to Toggle between 4 and 20 mA
• DMM designed to meet 1000 Volt IEC 1010 CAT III Standards
• Precision 1000V, 440 mA True-RMS Digital Multimeter
• Frequency Measurement to 20 kHz
• 20 mA DC Current Source/Loop Calibrator/Simulator

• Price	$695.00
  Order Now Below

NIST Traceable Calibration Certificates

To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for all of the Vitrek products, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited/ ISO 17025 accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest.

Fluke Pressure Calibrators 717-1G | 717-30G | 717-100G | 717-300G | 717-500G | 717-1000G | 717-1500G | 717-3000G | 718-1G 718-30US | 718-100US | 718-300G