Fluke 741B Documenting Process Calibrator

The Fluke 741B “A Complete Documenting Calibrator”

The 741B does the work of several tools – sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. For documentation, the 741B automates calibration procedures and captures your data.
And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. 
The 741B is the choice for plants that use standard company worksheets and that make reports in the shop. It has storage capacity for a day's calibration and measurement data. When you're back at the shop recall the data on screen to fill out calibration forms.

The 741B is easy to use with flexible test strategies. And like all Fluke tools, it's rugged, reliable and tough as nails. It's like having several powerful tools in one - so you can work faster than ever.

Fluke 741B Documenting Process Calibrator Features

• Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
• Power transmitters during test using loop supply with simultaneous mA measurement
• Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
• Measure and source simultaneously with one compact, rugged, reliable tool
• Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
• Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
• Easy to use
• Three year warranty
• Bright white display. Read both sourced and measured parameters.
• Multi-lingual interface
• Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1msec.

Fluke 743B Documenting Process Calibrator

• Fluke 744 Documenting Process Calibrator-HART
• The Fluke 744 HART Documenting Process Calibrator is a powerful multifunction documenting calibrator that lets yoou download procedures, lists and instructions created with software and/or upload data for printing, archiving and analysis. The Fluke 744 features the powerfully built HART interface capable of performing most all of the day-to-day dtasks you now perform with separate communicators. The Fluke 744 incorporates
• Eleven T/C Curves and Eight RTD Curves (plus ohms), DC input: mA, V, mV, or Frequency. For Pressure, select one of the 29 Interchangeable Modules from 1.0 inch water to 10000 PSI. The Model 744 adds HART Communication capability for Calibrating, Maintaining, and Troubleshooting HART Instrumentation.
• • Features Include:
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
  • Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
  • Power transmitters during test using loop supply with simultaneous mA measurement
  • Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
  • Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
  • Holds up to a full week of downloaded procedures and calibration results.
  • Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
  • Three year warranty
  • Bright white dual display. Read both sourced and measured parameters simultaneously.
  • Multi lingual interface
  • Rechargeable NiMH battery for 10 hour uninterrupted use. Includes gas gauge.
  • Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
  • Delivered with DPC/Track Sample software.
  • Compatible with many Asset Management software packages.
  • HART Capabilities 
    Flluke Hart's 744 Documenting Calibrator is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 275 HART communicator.

NIST Traceable Calibration Certificates

To assist our customers in satisfying ISO-9001:2000, section 8.2, certified monitor and measurement calibration requirements, ATEQUIP.com can supply for all of the Vitrek products, certified NIST traceable calibration certificates from an ANSI/NCSL Z540-1-1994 compliant-accredited/ ISO 17025 accredited calibration laboratory. Please contact us directly for information on your specific test equipment interest.

Fluke 744, 743B & 741B Documenting Process Calibrators